FAG 61906-2RSR-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- RS-stocknr.:
- 260-0699
- Fabrikantnummer:
- 61906-2RSR-HLC
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 44,75
(excl. BTW)
€ 54,15
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 14 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 44,75 |
*prijsindicatie
- RS-stocknr.:
- 260-0699
- Fabrikantnummer:
- 61906-2RSR-HLC
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 30mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 47mm | |
| Race Width | 9mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| Race Material | Bearing Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 5.01kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 7.24kN | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Series | 619-2RSR | |
| Limiting Speed | 7600rpm | |
| Flange Outside Diameter | 47mm | |
| Race Type | Deep Groove | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 30mm | ||
Product Type Ball Bearing | ||
Outside Diameter 47mm | ||
Race Width 9mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
Race Material Bearing Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 5.01kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 7.24kN | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Series 619-2RSR | ||
Limiting Speed 7600rpm | ||
Flange Outside Diameter 47mm | ||
Race Type Deep Groove | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
- Land van herkomst:
- JP
Schaeffler 619-2RSR Series Ball Bearing, 30mm Bore Diameter, 47mm Outside Diameter - 61906-2RSR-HLC
This ball bearing is a single-row deep-groove unit designed to support radial loads and enable smooth rotational movement in rotating machinery. It features sealed faces and a steel cage, suited to installations requiring contained lubrication and moderate-speed operation within a defined temperature range.
Features and Benefits:
• Dynamic load capacity 7.24 kN for sustained radial loading
• Static load capacity 5.01 kN resists deformation under shock
• Limiting speed 7,600 r/min supports higher-speed applications
• Internal clearance CN maintains controlled axial and radial play
• Steel construction and sealed ends reduce contamination ingress
• Flange outside diameter 47 mm aids axial location in housings
• Static load capacity 5.01 kN resists deformation under shock
• Limiting speed 7,600 r/min supports higher-speed applications
• Internal clearance CN maintains controlled axial and radial play
• Steel construction and sealed ends reduce contamination ingress
• Flange outside diameter 47 mm aids axial location in housings
Applications
• Suitable for precision motor and spindle assemblies
• Used with gearboxes requiring sealed rotational elements
• Ideal for Compact pump and compressor shafts
• Can be used for conveyor idlers in enclosed housings
• Used for small electric drive units with moderate speeds
• Used with gearboxes requiring sealed rotational elements
• Ideal for Compact pump and compressor shafts
• Can be used for conveyor idlers in enclosed housings
• Used for small electric drive units with moderate speeds
What shaft and housing interfaces must be checked before fitting?
Verify the shaft shoulder diameter meets the minimum clearance and the housing shoulder does not exceed the specified maximum fillet radius to ensure correct seating.
What operating temperatures can be expected for continuous service?
The unit operates across a defined temperature range from -30°C to 100°C for normal service.
How should speed limitations influence system design?
Design should restrict rotational speed to the listed limiting speed to prevent accelerated wear and heat generation in the Seals and raceways.
What mass should be accounted for when calculating rotating inertia?
Use the stated mass of 0.048 kg when evaluating rotor inertia and balancing requirements.
Gerelateerde Links
- FAG 61906-2Z-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61906-HLC 1 Row Deep Groove Ball Bearing - 30 mm ID, 47 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG S6005-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 61807-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 47 mm OD
- FAG S6200-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 30 mm OD
- FAG S6006-2RSR-HLC 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG S6206-2RSR-HLC 1 Row Ball Bearing - 30 mm ID, 62 mm OD