FAG 61801-2RSR-HLC 1 Row Ball Bearing - 12 mm ID, 21 mm OD

Subtotaal (1 verpakking van 10 eenheden)*

€ 185,09

(excl. BTW)

€ 223,96

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
Per verpakking*
10 +€ 18,509€ 185,09

*prijsindicatie

RS-stocknr.:
260-0685
Fabrikantnummer:
61801-2RSR-HLC
Fabrikant:
FAG
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FAG

Product Type

Ball Bearing

Inside Diameter

12mm

Outside Diameter

21mm

Race Width

5mm

Ball Material

Steel

Race Material

Bearing Steel

Cage Material

Steel

End Type

Closed

Number of Rows

1

Internal Clearance

CN

Static Load Rating

1.04kN

Dynamic Load Rating

1.92kN

Bore Type

Cylindrical

Series

618-2RSR

Standards/Approvals

No

Limiting Speed

18100rpm

Flange Outside Diameter

21mm

Race Type

Deep Groove

Bearing Type

Single Row Deep Groove Ball

Vrijgesteld

Land van herkomst:
JP

Schaeffler 618-2RSR Series Ball Bearing, 21mm Outside Diameter, 12mm Inside Diameter - 61801-2RSR-HLC


This ball bearing is a single-row deep-groove component designed to support radial loads in rotating assemblies where sealed protection and Compact form are required. It operates across a broad temperature span and is intended for use in applications demanding high rotational speed and sealed containment of the internal elements.

Features and Benefits:


• Dynamic load capacity 1.92 kN improves operational endurance
• Static load capacity 1.04 kN resists deformation under stoppage
• Limiting speed 18 100 r/min enables high-speed rotational use
• CN internal clearance ensures controlled axial and radial play
• Steel cage and sealed construction reduce contamination ingress
• Bearing steel races provide wear resistance and service life

Applications


• Suitable for Compact electric motor shafts
• Ideal for precision gearbox input bearings
• Used with small pulleys and idler assemblies
• Can be used for automation actuator rotary joints
• Suitable for handheld power-tool spindle supports

What are the operating temperature limits for this bearing?


It functions between -30°C and 100°C.

What mounting shoulder dimensions must the assembly respect?


Shaft shoulder minimum diameter is 14 mm and housing shoulder maximum diameter is 19 mm for correct seating.

How should fillet and chamfer dimensions be treated during installation?


Maximum fillet radius permitted is 0.3 mm and minimum chamfer is 0.3 mm to avoid interference with ring profiles.

What are the inner and outer reference diameters for ring calibration?


The inner ring calibration diameter is 13.8 mm and the outer ring calibration diameter is 19.2 mm.

What is the component mass to consider in rotating mass calculations?


The unit weight is 0.009 kg for inertia and balance planning.

Gerelateerde Links