Moflash LEDD125 Series Blue Steady, Flashing Beacon 230V dc, LED Bulb Surface, IP65

RS-stocknr.:: 755-9590
Fabrikantnummer:: LEDD125-02-03
Fabrikant:: Moflash

Moflash LEDD125 Series Blue Steady, Flashing Beacon 230V dc, LED Bulb Surface, IP65

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 129,46

(excl. BTW)

€ 156,65

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 16 maart 2026
Plus verzending 4 stuk(s) vanaf 23 maart 2026
Plus verzending 4 stuk(s) vanaf 20 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 129,46

*prijsindicatie

RS-stocknr.:: 755-9590
Fabrikantnummer:: LEDD125-02-03
Fabrikant:: Moflash

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Moflash
	Product Type	Beacon
	Light Effect	Steady, Flashing
	Lens Colour	Blue
	Housing Material	Polycarbonate, ABS
	Bulb Type	LED
	Current Type	DC
	Mount Type	Surface
	Current Consumption	170 mA
	Base Diameter	98mm
	Terminal Type	Plug-In
	Housing Colour	Black
	Lamp Included	Yes
	Maximum Supply Voltage	230V dc
	Minimum Operating Temperature	-20°C
	Series	LEDD125
	Maximum Operating Temperature	45°C
	Height	162mm
	IP Rating	IP65
	Standards/Approvals	CE Certified

	Alles selecteren
	Merk Moflash
	Product Type Beacon
	Light Effect Steady, Flashing
	Lens Colour Blue
	Housing Material Polycarbonate, ABS
	Bulb Type LED
	Current Type DC
	Mount Type Surface
	Current Consumption 170 mA
	Base Diameter 98mm
	Terminal Type Plug-In
	Housing Colour Black
	Lamp Included Yes
	Maximum Supply Voltage 230V dc
	Minimum Operating Temperature -20°C
	Series LEDD125
	Maximum Operating Temperature 45°C
	Height 162mm
	IP Rating IP65
	Standards/Approvals CE Certified

Land van herkomst:: GB

Moflash Multifunction Blue LED Beacon, 24V DC, 162mm Height - LEDD125 Series - LEDD125-02-03

This LED (light-emitting diode) beacon from Moflash emits a bright blue light to indicate a change in equipment operation, such as powering down. The LED bulb is housed within a tough polycarbonate (PC) lens to protect it against impact. It can be set to a continuous light mode, a standard flashing mode at 60FPM (flashes per minute) or a rapid flashing mode at 120FPM for a more urgent signal. The beacon has a broad operating temperature range of -25ºC to +45ºC, so it's suitable for use in demanding environments, ranging from cold storage units to hot warehouses.

Features & Benefits

• IP65 (ingress protection) rating means it's protected against dust and low-pressure water jets

• ABS (acrylonitrile butadiene styrene) plastic base and polycarbonate lens are ultraviolet (UV) stable to prevent discolouration and warping in sunlight

• Suitable for wall or surface mounting for versatile installation

Applications

• Machine parts manufacturing

• Maintenance work

• Emergency response vehicles

• Manufacturing lines

Is this beacon energy-efficient?

Yes, thanks to its low current consumption of just 170mA, it's an energy-efficient option.

Moflash Multi-Function LED Beacon - LEDD125 Series

The LEDD 125 Beacons are suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

100000 hours life for LED

48 LED array ultra bright

360° visibility

Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)

3 point fixing

UV stable polycarbonate lens and ABS base

IP65 protection

RoHS compliant

CE marking