INA Bearing Insert 20 mm ID 47 mm OD GSH20-XL-2RSR-B
- RS-stocknr.:
- 194-6926
- Fabrikantnummer:
- GSH20-XL-2RSR-B
- Fabrikant:
- INA
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 64,69
(excl. BTW)
€ 78,27
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 64,69 |
| 5 - 9 | € 60,88 |
| 10 - 24 | € 59,58 |
| 25 + | € 58,36 |
*prijsindicatie
- RS-stocknr.:
- 194-6926
- Fabrikantnummer:
- GSH20-XL-2RSR-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 20 mm | |
| Outside Diameter | 47 mm | |
| Static Load Rating | 13.4kN | |
| Dynamic Load Rating | 7kN | |
| Overall Width | 28mm | |
| Standards/Approvals | No | |
| Bore Type | Round | |
| Series | GSH | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Bearing Insert | ||
Inside Diameter 20 mm | ||
Outside Diameter 47 mm | ||
Static Load Rating 13.4kN | ||
Dynamic Load Rating 7kN | ||
Overall Width 28mm | ||
Standards/Approvals No | ||
Bore Type Round | ||
Series GSH | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Insert 35 mm ID 72 mm OD GSH35-XL-2RSR-B
- INA Bearing Insert 40 mm ID 80 mm OD GSH40-XL-2RSR-B
- INA Bearing Insert 50 mm ID 90 mm OD GSH50-XL-2RSR-B
- INA Bearing Insert 30 mm ID 62 mm OD GSH30-XL-2RSR-B
- INA Bearing Insert 25 mm ID 52 mm OD GSH25-XL-2RSR-B
- INA Bearing Insert 20 mm ID 47 mm OD GRAE20-XL-NPP-B
- INA Bearing Insert 20 mm ID 47 mm OD GAY20-XL-NPP-B
- INA Bearing Unit Insert 20 mm ID 47 mm OD GYE20-XL-KRR-B