INA Bearing Insert 50 mm ID 90 mm OD GSH50-XL-2RSR-B
- RS-stocknr.:
- 194-6930
- Fabrikantnummer:
- GSH50-XL-2RSR-B
- Fabrikant:
- INA
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 201,59
(excl. BTW)
€ 243,92
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 6 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 201,59 |
| 5 - 9 | € 189,72 |
| 10 + | € 185,87 |
*prijsindicatie
- RS-stocknr.:
- 194-6930
- Fabrikantnummer:
- GSH50-XL-2RSR-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 50 mm | |
| Outside Diameter | 90 mm | |
| Static Load Rating | 35kN | |
| Dynamic Load Rating | 23.1kN | |
| Overall Width | 38mm | |
| Standards/Approvals | No | |
| Bore Type | Round | |
| Series | GSH | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Bearing Insert | ||
Inside Diameter 50 mm | ||
Outside Diameter 90 mm | ||
Static Load Rating 35kN | ||
Dynamic Load Rating 23.1kN | ||
Overall Width 38mm | ||
Standards/Approvals No | ||
Bore Type Round | ||
Series GSH | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Inserts 50mm ID 90mm OD GLE50-XL-KRR-B
- INA Bearing Inserts 50mm ID 90mm OD GRAE50-XL-NPP-B
- INA Bearing Inserts 50mm ID 90mm OD GAY50-XL-NPP-B
- INA Bearing Inserts 50mm ID 90mm OD GE50-XL-KTT-B
- INA Bearing Inserts 50mm ID 90mm OD GE50-XL-KRR-B
- INA Bearing Unit Insert 50mm ID 90mm OD GYE50-XL-KRR-B
- INA Bearing Inserts 40mm ID 80mm OD GSH40-XL-2RSR-B
- INA Bearing Inserts 30mm ID 62mm OD GSH30-XL-2RSR-B