SKF Take Up Bearing 30 mm ID 114 mm OD UCT 206/H
- RS-stocknr.:
- 230-6105
- Fabrikantnummer:
- UCT 206/H
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 40,46
(excl. BTW)
€ 48,96
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 8 stuk(s) vanaf 09 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 40,46 |
*prijsindicatie
- RS-stocknr.:
- 230-6105
- Fabrikantnummer:
- UCT 206/H
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 30mm | |
| Product Type | Take Up Bearing | |
| Outside Diameter | 114mm | |
| Material | Cast Iron | |
| Static Load Rating | 11.2kN | |
| Dynamic Load Rating | 19.5kN | |
| Locking Type | Set Screw | |
| Bore Type | Cylindrical | |
| Overall Width | 38.1mm | |
| Standards/Approvals | No | |
| Limiting Speed | 5000rpm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 30mm | ||
Product Type Take Up Bearing | ||
Outside Diameter 114mm | ||
Material Cast Iron | ||
Static Load Rating 11.2kN | ||
Dynamic Load Rating 19.5kN | ||
Locking Type Set Screw | ||
Bore Type Cylindrical | ||
Overall Width 38.1mm | ||
Standards/Approvals No | ||
Limiting Speed 5000rpm | ||
- Land van herkomst:
- IT
SKF Take Up Bearing, 114mm Outside Diameter, 30mm Inside Diameter - UCT 206/H
This take-up bearing is a cast iron support component designed to accommodate rotational shafts within industrial tensioning and conveying assemblies. It provides a locating and load-bearing function for shafts running at elevated speeds, where a cylindrical bore and set-screw locking method enable straightforward shaft retention and alignment in machinery environments.
Features and Benefits:
• Set-screw locking secures shaft position during continuous operation
• Cylindrical bore offers straightforward mounting on round shafts
• 11.2 kN static rating resists sustained radial loads under standstill
• 19.5 kN dynamic rating supports fluctuating operational loads
• 5,000 r/min limiting speed accommodates high-speed rotating shafts
• Cylindrical bore offers straightforward mounting on round shafts
• 11.2 kN static rating resists sustained radial loads under standstill
• 19.5 kN dynamic rating supports fluctuating operational loads
• 5,000 r/min limiting speed accommodates high-speed rotating shafts
Applications
• Suitable for conveyor tensioning rollers in manufacturing lines
• Used with idler shafts in material handling equipment
• Ideal for shaft support in rotary tension assembly units
• Can be used for pulleys in high-speed drive systems
• Used with idler shafts in material handling equipment
• Ideal for shaft support in rotary tension assembly units
• Can be used for pulleys in high-speed drive systems
What material is used for the housing to withstand industrial stresses?
The housing is MADE from cast iron, chosen for structural rigidity and wear resistance.
How is the bearing secured to the shaft to prevent axial movement?
A set-screw locking arrangement is used to clamp the inner surface to the shaft.
What bore form should the mating shaft possess for correct fit?
The shaft must be cylindrical to match the bearing’s cylindrical bore.
What operating speed limits must be observed during selection?
The bearing is rated for operation up to 5,000 r/min.
How does the bearing perform under dynamic load conditions?
It is specified with a 19.5 kN dynamic load capacity to accommodate variable operational forces.
Gerelateerde Links
- SKF Take Up Bearing 25 mm ID 100 mm OD UCT 205/H
- SKF Take Up Bearing 40 mm ID 145 mm OD UCT 208/H
- SKF Take Up Bearing 50 mm ID 149 mm OD UCT 210/H
- SKF Take Up Bearing 20 mm ID 97 mm OD Y/UCT 204/H
- SKF Take Up Bearing 65 mm ID 82.5 mm OD Y/UCT 213/H
- SKF Take Up Bearing 70 mm ID 225 mm OD UCT 214
- SKF Take Up Bearing 80 mm ID 237 mm OD UTC 216
- SKF Bearing Housing Bearing Assembly For Use With Take Up Housings For 30 mm Bore Y Bearings, SHT 30