SKF Take Up Bearing 65 mm ID 82.5 mm OD Y/UCT 213/H
- RS-stocknr.:
- 230-6111
- Fabrikantnummer:
- Y/UCT 213/H
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 119,10
(excl. BTW)
€ 144,11
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 24 mei 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 119,10 |
*prijsindicatie
- RS-stocknr.:
- 230-6111
- Fabrikantnummer:
- Y/UCT 213/H
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Take Up Bearing | |
| Inside Diameter | 65mm | |
| Outside Diameter | 82.5mm | |
| Material | Cast Iron | |
| Static Load Rating | 40000N | |
| Dynamic Load Rating | 57200N | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Take Up Bearing | ||
Inside Diameter 65mm | ||
Outside Diameter 82.5mm | ||
Material Cast Iron | ||
Static Load Rating 40000N | ||
Dynamic Load Rating 57200N | ||
Standards/Approvals No | ||
- Land van herkomst:
- IT
SKF Take-Up Bearing, Cast Iron Housing, 2350r/min Limiting Speed, 65mm ID, 82.5mm OD - Y/UCT 213/H
Need a rotating component that lets you tweak the position of your shaft? This take-up bearing from SKF has you covered. It's made up of an insert bearing set in a housing that accommodates adjustment so you can count on precise alignment. The inner ring extends on both sides for quick mounting on the shaft. To keep the inner ring stable, you can simply tighten the two set screws through it. A 120° angle of separation between the screws offers added stability, helping to balance the mechanical load.
Features & Benefits
• Limiting speed of 2,350r/min to withstand high-speed rotation
• Relubrication hole for simple refilling with grease
• Seal and flinger on both sides to prevent contamination from dust and moisture
• Basic dynamic load rating of 57.2kN and static load rating of 40kN, so it's suitable for heavy-duty tasks
Applications
• Oil and gas industry
• Aerospace engineering
• Bottling plants
What material is this assembly made from?
The insert bearing is made from rugged steel that stands up to impacts and corrosion. For added durability, the housing is made from wear-resistant cast iron.
Gerelateerde Links
- SKF Take Up Bearing 20 mm ID 97 mm OD Y/UCT 204/H
- SKF Take Up Bearing 70 mm ID 225 mm OD UCT 214
- SKF Bearing Housing Bearing Assembly For Use With Take Up Housings For 65 mm Bore Y Bearings, SHT 65
- SKF Take Up Bearing 25 mm ID 100 mm OD UCT 205/H
- SKF Take Up Bearing 40 mm ID 145 mm OD UCT 208/H
- SKF Take Up Bearing 30 mm ID 114 mm OD UCT 206/H
- SKF Take Up Bearing 50 mm ID 149 mm OD UCT 210/H
- SKF Bearing Housing Bearing Assembly For Use With Take Up Housings For 30 mm Bore Y Bearings, SHT 30