SKF, TU 50 FM 50 mm ID
- RS-stocknr.:
- 209-4169
- Fabrikantnummer:
- TU 50 FM
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 152,80
(excl. BTW)
€ 184,89
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 152,80 |
*prijsindicatie
- RS-stocknr.:
- 209-4169
- Fabrikantnummer:
- TU 50 FM
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 50 mm | |
| Locking Type | Set Screw | |
| Housing Material | Cast Iron | |
| Length | 149mm | |
| Width | 49 mm | |
| Depth | 117mm | |
| End Type | Shielded | |
| Standards/Approvals | No | |
| Limiting Speed | 4000rpm | |
| Static Load Rating | 23.2kN | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 50 mm | ||
Locking Type Set Screw | ||
Housing Material Cast Iron | ||
Length 149mm | ||
Width 49 mm | ||
Depth 117mm | ||
End Type Shielded | ||
Standards/Approvals No | ||
Limiting Speed 4000rpm | ||
Static Load Rating 23.2kN | ||
- Land van herkomst:
- IT
The SKF take-up ball bearing units consist of an insert bearing and a housing, and are compliant with ISO standards, North American standards, and Japanese Industrial Standards (JIS), as required by many industrial applications. In contrast, take-up units for the SKF Food Line are not compliant with these standards and are therefore considered as not standardized. The SKF take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals.
Temperature limits
Permissible speed
Lubrication
Mounting and dismounting
Designation system