Take Up Bearing Unit, ST50, 50mm ID
- RS-stocknr.:
- 243-5644
- Fabrikantnummer:
- ST50
- Fabrikant:
- NSK-RHP
2 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 92,19
(excl. BTW)
€ 111,55
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 92,19 |
| 5 - 9 | € 88,51 |
| 10 + | € 86,66 |
- RS-stocknr.:
- 243-5644
- Fabrikantnummer:
- ST50
- Fabrikant:
- NSK-RHP
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving
Self Lube Bearing Take-Up Unit
Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.
Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Supplied with
grease nipples
Bearing Take-Up Units
Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 50mm |
| Bearing Unit Type | Take Up Bearing Unit |
| Material | Cast Iron |
| Length | 151mm |
| Width | 118mm |
| Depth | 49.5mm |