onsemi NCV7357MW0R2G, CAN Transceiver 5 Mbps, 8-Pin DFN
- RS-stocknr.:
- 195-2445
- Fabrikantnummer:
- NCV7357MW0R2G
- Fabrikant:
- onsemi
Subtotaal (1 verpakking van 50 eenheden)*
€ 39,00
(excl. BTW)
€ 47,00
(incl. BTW)
Voeg 100 eenheden toe voor gratis bezorging
Laatste voorraad RS
- Laatste 3.000 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 50 + | € 0,78 | € 39,00 |
*prijsindicatie
- RS-stocknr.:
- 195-2445
- Fabrikantnummer:
- NCV7357MW0R2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Maximum Data Rate | 5Mbps | |
| Product Type | CAN Transceiver | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Silent, Normal | |
| Supply Current | 105mA | |
| Mount Type | Surface | |
| Package Type | DFN | |
| Interface Type | CAN FD | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.75V | |
| Maximum Supply Voltage | 5.25V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | NCV7357 | |
| Length | 3.05mm | |
| Height | 0.85mm | |
| Standards/Approvals | No | |
| Width | 3.05 mm | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Maximum Data Rate 5Mbps | ||
Product Type CAN Transceiver | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Silent, Normal | ||
Supply Current 105mA | ||
Mount Type Surface | ||
Package Type DFN | ||
Interface Type CAN FD | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.75V | ||
Maximum Supply Voltage 5.25V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series NCV7357 | ||
Length 3.05mm | ||
Height 0.85mm | ||
Standards/Approvals No | ||
Width 3.05 mm | ||
Automotive Standard AEC-Q100 | ||
The NCV7327 is a fully featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus. The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node. Each node has a slave MCU−state machine that recognizes and translates the instructions specific to that function. The main attraction of the LIN bus is that all the functions are not time critical and usually relate to passenger comfort.