Huber+Suhner Straight 50 Ω RF Adapter 11GHz Male Male
- RS-stocknr.:
- 741-7187
- Fabrikantnummer:
- 32_PC7-QN-50-1/1-_NE
- Fabrikant:
- Huber+Suhner
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 828,47
(excl. BTW)
€ 1.002,45
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 05 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 828,47 |
| 10 - 24 | € 753,20 |
| 25 + | € 728,11 |
*prijsindicatie
- RS-stocknr.:
- 741-7187
- Fabrikantnummer:
- 32_PC7-QN-50-1/1-_NE
- Fabrikant:
- Huber+Suhner
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Huber+Suhner | |
| Product Type | RF Adapter | |
| Impedance | 50Ω | |
| Orientation | Straight | |
| Polarity | Normal | |
| Operating Frequency | 11GHz | |
| Converts From Gender - Connector | Male | |
| Converts to Gender - Connector | Male | |
| Series | PC7 | |
| Standards/Approvals | RoHS | |
| Length | 55.7mm | |
| Contact Material | Beryllium Copper, Brass, Stainless Steel | |
| Alles selecteren | ||
|---|---|---|
Merk Huber+Suhner | ||
Product Type RF Adapter | ||
Impedance 50Ω | ||
Orientation Straight | ||
Polarity Normal | ||
Operating Frequency 11GHz | ||
Converts From Gender - Connector Male | ||
Converts to Gender - Connector Male | ||
Series PC7 | ||
Standards/Approvals RoHS | ||
Length 55.7mm | ||
Contact Material Beryllium Copper, Brass, Stainless Steel | ||
- Land van herkomst:
- CH
Hubner+Suhner Adaptors for QN interfaces
Hubner+Suhner adaptors are used to measure applications with QN interfaces. These adaptors support calibration with open
standard interfaces, due in part to the same electrical length and the same return loss behaviour of all these adaptors,
the swapping method can be utilised.
Identical electrical length
Fast measurement set-up change: e.g. male to female
Measure devices with QN interfaces
Precise calibration for phase critical measurements
50Ω, 11GHz
HUBER+SUHNER QN Series
The QN series is based on the inner dimensions and performance of the N connector; however, instead of a threaded coupling mechanism, a SNAP-ON mechanism is used, offering a time-saving and fail-safe mounting. The QN series also allows increased packaging density compared to N connectors due to the fact that no torque spanner is required to fasten the coupling nut. Additionally, the outer dimensions of QN are smaller than N, offering the advantage that TNC-sized flanges can be used on QN connectors.
50Ω impedance
Frequency range up to 11GHz, although most connectors are return-loss optimised for up to 6GHz
Similar performance to N but much easier to mate
User-friendly, fast and secure
Time saving thanks to SNAP-ON mating
No additional space for a torque wrench is needed between connectors
Gerelateerde Links
- Huber+Suhner Straight 50 Ω Coaxial Adapter 11GHz Male Female
- Huber+Suhner Straight 50 Ω RF Adapter 11GHz Male Male
- Huber+Suhner Straight 50 Ω RF Adapter 11GHz Male Female
- Huber+Suhner T 50 Ω RF Adapter 11GHz Female Male
- Huber+Suhner Right Angle 50 Ω RF Adapter 11GHz Male Female
- Huber+Suhner Straight 50 Ω RF Adapter 18GHz Male Male
- Huber+Suhner Straight 50 Ω RF Adapter 18GHz Male Female
- Huber+Suhner Straight 50 Ω RF Adapter 4GHz Male Female