Huber+Suhner ST18A Series Coaxial Cable Male Type N to Female N Type, 3 m 50 Ω

RS-stocknr.:: 126-3143
Fabrikantnummer:: ST18A/Nm/Nf/3000 mm
Fabrikant:: Huber+Suhner

Huber+Suhner ST18A Series Coaxial Cable Male Type N to Female N Type, 3 m 50 Ω

Subtotaal (1 eenheid)*

€ 783,92

(excl. BTW)

€ 948,54

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 17 stuk(s) vanaf 24 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 783,92

*prijsindicatie

RS-stocknr.:: 126-3143
Fabrikantnummer:: ST18A/Nm/Nf/3000 mm
Fabrikant:: Huber+Suhner

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Huber+Suhner
	Connector Type A	Type N
	Product Type	Coaxial Cable
	Connector Type B	N Type
	Connector Gender A	Male
	Connector Gender B	Female
	Maximum Frequency	18GHz
	Characteristic Impedance	50Ω
	Cable Length	3m
	Jacket Colour	Blue
	Standards/Approvals	REACH Compliant
	Jacket Material	Polytetrafluoroethylene
	Series	ST18A

	Alles selecteren
	Merk Huber+Suhner
	Connector Type A Type N
	Product Type Coaxial Cable
	Connector Type B N Type
	Connector Gender A Male
	Connector Gender B Female
	Maximum Frequency 18GHz
	Characteristic Impedance 50Ω
	Cable Length 3m
	Jacket Colour Blue
	Standards/Approvals REACH Compliant
	Jacket Material Polytetrafluoroethylene
	Series ST18A

ST18A Armoured Cable assembly data sheet

Land van herkomst:: PL

Huber+Suhner Coaxial Cable, 3M Cable Length, 50Ω Characteristic Impedance - ST18A/Nm/Nf/3000 mm

This coaxial cable provides a high-frequency connection for RF systems, designed to link equipment with N-type male connectors. It is intended for use where stable 50Ω transmission is required up to high microwave frequencies and where a durable, chemically resistant outer layer is necessary for routine industrial environments.

Features and Benefits:

• Operates to 18 GHz for extended high-frequency performance
• 50Ω impedance ensures consistent signal integrity over the link
• Type N male terminations permit robust threaded connections
• Polytetrafluoroethylene jacket offers chemical and heat resilience
• Blue outer sheath enables quick Visual identification in installations

Applications

• Suitable for laboratory test benches requiring high-frequency cabling
• Ideal for RF component interconnection in automation systems
• Used with measurement instruments needing 50 ohm matching
• Can be used for antenna feedline runs in workshop setups

What connector genders does it use and why is that relevant?

Both ends employ male N-type connectors, providing secure, threaded mating for mechanical stability and consistent electrical contact in antenna and instrument interfaces.

How long is the cable and how does length affect use?

The cable is 3 m long, this length balances reach and minimises insertion loss for short-range RF links within racks or test environments.

What material is used for the outer layer and what operating advantages does it give?

The outer covering is PTFE, which resists many chemicals and sustains performance at elevated temperatures, reducing ageing in demanding electrical or mechanical installations.

Is the cable suitable for precision RF measurements?

Yes, its controlled 50Ω characteristic and capability up to 18 GHz make it appropriate for many measurement and calibration tasks where impedance matching matters.