LMV762MA/NOPB Texas Instruments, Dual Comparator, Push-Pull O/P, 3 V 8-Pin SOIC
- RS-stocknr.:
- 536-0420P
- Fabrikantnummer:
- LMV762MA/NOPB
- Fabrikant:
- Texas Instruments
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd in een buis)*
€ 87,50
(excl. BTW)
€ 106,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 40 stuk(s) vanaf 12 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 + | € 1,75 |
*prijsindicatie
- RS-stocknr.:
- 536-0420P
- Fabrikantnummer:
- LMV762MA/NOPB
- Fabrikant:
- Texas Instruments
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Texas Instruments | |
| Comparator Type | Low Power | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Power Supply Type | Single | |
| Output Type | Push-Pull | |
| Number of Channels per Chip | 2 | |
| Pin Count | 8 | |
| Typical Single Supply Voltage | 3 V | |
| Dimensions | 4.9 x 3.9 x 1.45mm | |
| Length | 4.9mm | |
| Width | 3.9mm | |
| Height | 1.45mm | |
| Typical CMRR | 100dB | |
| Maximum Operating Temperature | +125 °C | |
| Typical PSRR | 110dB | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk Texas Instruments | ||
Comparator Type Low Power | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Power Supply Type Single | ||
Output Type Push-Pull | ||
Number of Channels per Chip 2 | ||
Pin Count 8 | ||
Typical Single Supply Voltage 3 V | ||
Dimensions 4.9 x 3.9 x 1.45mm | ||
Length 4.9mm | ||
Width 3.9mm | ||
Height 1.45mm | ||
Typical CMRR 100dB | ||
Maximum Operating Temperature +125 °C | ||
Typical PSRR 110dB | ||
Minimum Operating Temperature -40 °C | ||
LMV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.