Eaton, ZE Overload Relay 1 NO/1 NC, 2.4A, 4 A F.L.C, 4A Contact Rating, 6 W, 600V ac

RS-stocknr.:: 326-807
Artikelnummer Distrelec:: 136-22-526
Fabrikantnummer:: 014518 ZE-4
Fabrikant:: Eaton

Eaton, ZE Overload Relay 1 NO/1 NC, 2.4A, 4 A F.L.C, 4A Contact Rating, 6 W, 600V ac

Subtotaal (1 eenheid)*

€ 47,90

(excl. BTW)

€ 57,96

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

8 stuk(s) klaar voor verzending
2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 47,90

*prijsindicatie

RS-stocknr.:: 326-807
Artikelnummer Distrelec:: 136-22-526
Fabrikantnummer:: 014518 ZE-4
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Overload Relay
	FLC Motor Rating	2.4, 4A
	Relay Contact Current	4A
	Mount Type	Direct
	Series	ZE
	Power Rating	6W
	Terminal Type	Screw
	Normal State Configuration	1 NO/1 NC
	IP Rating	IP20
	Reset Method	Automatic & Manual
	Minimum Operating Temperature	-5°C
	Number of Auxiliary Contacts	2
	Adjustable Current Range	2.4 → 4 A
	Width	45mm
	Length	106mm
	Contact Voltage	690V ac
	Maximum Operating Temperature	55°C
	Standards/Approvals	UL Approved, VDE 0660, UL Category Control No.:NKCR, UL 60947-4-1, IEC/EN 60947-4-1, IEC/EN 60947, E29184, CSA File No.:012528, CSA Class No.:3211-03, CSA-C22.2 No. 60947-4-1-14, CSA Approved, CE Approved
	Depth	58mm
	Control Voltage	600V ac

	Alles selecteren
	Merk Eaton
	Product Type Overload Relay
	FLC Motor Rating 2.4, 4A
	Relay Contact Current 4A
	Mount Type Direct
	Series ZE
	Power Rating 6W
	Terminal Type Screw
	Normal State Configuration 1 NO/1 NC
	IP Rating IP20
	Reset Method Automatic & Manual
	Minimum Operating Temperature -5°C
	Number of Auxiliary Contacts 2
	Adjustable Current Range 2.4 → 4 A
	Width 45mm
	Length 106mm
	Contact Voltage 690V ac
	Maximum Operating Temperature 55°C
	Standards/Approvals UL Approved, VDE 0660, UL Category Control No.:NKCR, UL 60947-4-1, IEC/EN 60947-4-1, IEC/EN 60947, E29184, CSA File No.:012528, CSA Class No.:3211-03, CSA-C22.2 No. 60947-4-1-14, CSA Approved, CE Approved
	Depth 58mm
	Control Voltage 600V ac

Land van herkomst:: DE

Eaton Overload Relay, NO/NC, 2.4 to 4A FLC Rating - ZE Series - 014518 ZE-4

To protect motors that run with a full load current (FLC) of 2.4 to 4A from overloads, use this Eaton overload relay. It features a bimetallic strip that bends in the event of an overcurrent, breaking the power to the motor at a rate of between 2 and 10 seconds and preventing damage. The relay is easy to install and you can quickly reset it after it's been tripped using either the manual or automatic reset option.

Features & Benefits

• Screw terminals help you quickly make secure connections

• Wide operating temperature range of -5°C to +55°C for safe use in demanding industrial environments

What causes the bimetallic strip in this overload relay to bend?

This relay's reactive strip is made of two types of metal, which heat up in response to an overcurrent at fractionally different times. This causes the strip to deform and bend, preventing the continued flow of electricity and breaking the circuit to the motor.

How do I connect an overload relay?

An overload relay should aways be connected in line with the motor, so that the current supplied to the motor flows fully through the relay.

Eaton Contactor Overload Relay – ZE Series Thermal Overload Relays

This Eaton Contactor Overload Relay is designed to help your motor continue working in a safe environment by monitoring the current in the motor circuit and breaking the circuit when an electrical overload or phase failure is found. It works by cutting off the current to the motor when a high current situation occurs. As the relay receives the corresponding signal, it trips.

This Eaton product is predominantly designed for imitating the heating prototypes that are a staple for keeping your motors healthy, which increases the motor lifetime. It provides an affordable and efficient way for you to protect your motors, whilst giving you peace of mind that you have sufficient motor protection and control.

Eaton’s reliable and high-quality Overload Relay offers motor control within a multitude of environments, coming with a 600 V ac control voltage, 6W power rating and a temperature range of -5 to +55 °C. Eaton offer a wide range of reliable contactor overload relays to protect machinery from overheating, keeping your business and its operations accessible.

Features and Benefits

• An affordable way of preventing damage to the motor

• Compact in size with a 58mm x 106mm x 45mm (DxLxW)

• Wide operating temperature range of -5 to +55 °C

• Bimetallic tripping mechanism with trip response from 2 to 10 seconds

• Easy to install and reset once they have tripped

• Has test and stop functions, assessing quality of the overload relay

• Automatic and Manual reset methods

• Class 10 A overload

Note

Eaton formerly known as Moeller