ABB 1SBL24 Contactor, 24V ac Coil, 3-Pole, 26 A 24V ac, 3 NO, 690V

RS-stocknr.:: 253-1959
Fabrikantnummer:: 1SBL241022R8110
Fabrikant:: ABB

ABB 1SBL24 Contactor, 24V ac Coil, 3-Pole, 26 A 24V ac, 3 NO, 690V

Bekijk alle Contactors

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 253-1959
Fabrikantnummer:: 1SBL241022R8110
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Product Type	Contactor
	Coil Voltage	24V ac
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	26A
	Series	1SBL24
	Function	Control Unit
	Mount Type	DIN Rail
	Normal State Configuration	3 NO
	Number of Auxiliary Contacts	1
	Auxiliary Contact Configuration	1 NO
	Terminal Type	Screw
	Minimum Operating Temperature	-40°C
	Operational Current Ie	2A
	Contactor Application	Control Unit
	Control Circuit Voltage Uc	24V ac
	Maximum Operating Temperature	70°C
	Depth	90mm
	Length	94mm
	Width	54mm
	Standards/Approvals	EU Directive 2011/65/EU RoHS Status
	Pole and Throw Configuration	3P

	Alles selecteren
	Merk ABB
	Product Type Contactor
	Coil Voltage 24V ac
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 26A
	Series 1SBL24
	Function Control Unit
	Mount Type DIN Rail
	Normal State Configuration 3 NO
	Number of Auxiliary Contacts 1
	Auxiliary Contact Configuration 1 NO
	Terminal Type Screw
	Minimum Operating Temperature -40°C
	Operational Current Ie 2A
	Contactor Application Control Unit
	Control Circuit Voltage Uc 24V ac
	Maximum Operating Temperature 70°C
	Depth 90mm
	Length 94mm
	Width 54mm
	Standards/Approvals EU Directive 2011/65/EU RoHS Status
	Pole and Throw Configuration 3P

Land van herkomst:: BG

ABB UA26 Series Contactor, 16A Contact Current, 24VAc Coil Voltage - 1SBL241022R8110

This contactor is a three‑pole control unit designed for switching capacitor banks in industrial electrical systems. It operates from an AC control circuit and is intended for DIN‑rail installation in control panels. The device is suitable where controlled engagement of capacitors is required while managing inrush peaks and frequent switching cycles.

Features & Benefits

• 3P switching limits contacts to three main poles for capacitor control
• 16A conventional thermal current supports moderate load switching
• 24V AC control circuit enables common low‑voltage panel integration
• Accepts Peak inrush up to 100x nominal rms current protecting banks
• 3600 cycles per hour mechanical frequency for high switching rates

Applications

• Suitable for staged capacitor bank switching in power factor correction
• Ideal for motor control centres requiring reactive power management
• used with low‑voltage distribution panels for load compensation
• Can be used for retrofit replacement in existing contactor arrays

What Terminal types are provided for connection?

Screw terminals are supplied for both main and auxiliary circuits, with Pozidriv screws and cable clamps for secure terminations.

How does the product perform at elevated ambient temperatures?

It maintains rated operational powers with reduced kvar capacities as temperature rises, with specific permitted kvar values defined up to 70°C near the device.

What protection and fuse recommendations apply?

Auxiliary circuits are compatible with gG fuses and recommended short‑circuit protective devices range to match operational currents specified for different voltages.

What mechanical and electrical durability can be expected?

When capacitors are discharged to ≤50V before re‑energisation, electrical endurance reaches 100000 operating cycles with a block‑type pole design.