Lapp OLFLEX CLASSIC FD 810 Control Cable, 5 Cores, 2.5mm² 14 AWG, Unscreened, Grey Polyvinyl Chloride Sheath

RS-stocknr.:: 433-313
Fabrikantnummer:: 0026172
Fabrikant:: Lapp

Lapp OLFLEX CLASSIC FD 810 Control Cable, 5 Cores, 2.5mm² 14 AWG, Unscreened, Grey Polyvinyl Chloride Sheath

Subtotaal (1 rol van 50 meter)*

€ 395,57

(excl. BTW)

€ 478,64

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 28 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Rol(len)	Per rol	Per meter*
1 +	€ 395,57	€ 7,911

*prijsindicatie

RS-stocknr.:: 433-313
Fabrikantnummer:: 0026172
Fabrikant:: Lapp

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Lapp
	Series	OLFLEX CLASSIC FD 810
	Product Type	Control Cable
	Number of Cores	5
	Conductor Material	Bare Copper
	Jacket Material	Polyvinyl Chloride
	Jacket Colour	Grey
	Screened/Unscreened	Unscreened
	Outside Diameter	11.2mm
	Voltage	500V
	Minimum Operating Temperature	-40°C
	Conductor Type	Extra Fine
	Maximum Operating Temperature	80°C
	Standards/Approvals	acc. to IEC 60811, EN 50395, EN 50396
	Hazardous Area Certification	No
	Cable CSA	2.5mm²
	Fire Behaviour	Flame Retardant
	American Wire Gauge	14AWG

	Alles selecteren
	Merk Lapp
	Series OLFLEX CLASSIC FD 810
	Product Type Control Cable
	Number of Cores 5
	Conductor Material Bare Copper
	Jacket Material Polyvinyl Chloride
	Jacket Colour Grey
	Screened/Unscreened Unscreened
	Outside Diameter 11.2mm
	Voltage 500V
	Minimum Operating Temperature -40°C
	Conductor Type Extra Fine
	Maximum Operating Temperature 80°C
	Standards/Approvals acc. to IEC 60811, EN 50395, EN 50396
	Hazardous Area Certification No
	Cable CSA 2.5mm²
	Fire Behaviour Flame Retardant
	American Wire Gauge 14AWG

Datasheet - 0026172

Land van herkomst:: DE

Lapp OLFLEX CLASSIC Series Control Cable, 2.5mm² Conductor CSA, Grey Jacket - 0026172

This control cable is a multi-core power and signal conductor designed for industrial machine and control-panel wiring. It combines a flexible conductor construction with a flame-retardant PVC outer sheath and is built to operate across a broad temperature range for typical manufacturing and automation environments.

Features and Benefits:

• Five conductors provide multiple circuit connections in one cable
• 2.5mm² cross-sectional area supports moderate current loads
• Extra-fine bare copper delivers improved flexibility for routing
• Unscreened design reduces weight where screening is not required
• Rated for 500V enabling use on standard control circuits
• Flame-retardant PVC sheath resists ignition during fault conditions

Applications

• Used with motor starters and machine control circuits
• Suitable for wiring control panels in factories
• Ideal for cable runs within production-line equipment
• Can be used for interconnection of sensors and actuators
• Appropriate for replacement of existing industrial control runs

What temperature extremes will it tolerate in service?

It operates between -40°C and 80°C, permitting installation in chilled or warm industrial locations.

How does conductor construction affect installation flexibility?

The extra-fine stranded bare copper conductors increase pliability, easing pulling through conduits and tight trays.

Which standards govern its conductor and fire characteristics?

Conductor construction follows IEC 60228 and fire performance meets IEC 60332-1-2 among listed standards.

What is the overall cable size for routing considerations?

The cable has an outside diameter of 11.2mm for duct and conduit planning.