Elesa DD52R Counter, Counter, 5 Digit
- RS-stocknr.:
- 382-6530
- Fabrikantnummer:
- CE.82183-rb
- Fabrikant:
- Elesa
Subtotaal (1 eenheid)*
€ 66,01
(excl. BTW)
€ 79,87
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 8 stuk(s) vanaf 20 april 2026
- Plus verzending 12 stuk(s) vanaf 20 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 66,01 |
*prijsindicatie
- RS-stocknr.:
- 382-6530
- Fabrikantnummer:
- CE.82183-rb
- Fabrikant:
- Elesa
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Elesa | |
| Product Type | Counter | |
| Function | Counter | |
| Direction of Rotation | Clockwise | |
| Number of Digits | 5 | |
| Count Direction | Top Going | |
| Digit Height | 85mm | |
| Weight | 97g | |
| Standards/Approvals | No | |
| Series | DD52R | |
| Meter Type | Counter | |
| Alles selecteren | ||
|---|---|---|
Merk Elesa | ||
Product Type Counter | ||
Function Counter | ||
Direction of Rotation Clockwise | ||
Number of Digits 5 | ||
Count Direction Top Going | ||
Digit Height 85mm | ||
Weight 97g | ||
Standards/Approvals No | ||
Series DD52R | ||
Meter Type Counter | ||
Niet conform
- Land van herkomst:
- IT
Elesa Digital Mechanical Position Indicator
The Elesa DD52 series mechanical resolution counter is a 5-digit direct drive, digital position indicator. It has clockwise shaft rotation with a maximum shaft speed of 1250rpm. It is the black case, high-resistance, polyamide based (PA) technopolymer. It can be used for reading settings and outputs on machinery, as well as equipment requiring adjustment with the help of rotating shafts or lead screws.
Operating use:
To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on the pitch -see table)
To count the number of turns of a shaft (types 001.00 or 0001.0) for an operator to set a specific setting to perform a given function
Fitting Instructions:
Drill 6mm by 10mm deep hole 22mm from the centre of the shaft to accept rear locating pin
Zero set shaft and indicator reading
Locate on the shaft and tighten the grub screw
Features and Benefits
Pitch is 2.0
Display after 1 rev is 0002.0
Impact resistant thermoplastic case
Ultrasonically welded to prevent tampering and dirt ingression
Rear brass bushing with double sealing
Drive shaft diameter is 14mm
Applications
Material handling equipment
Rapid transit vehicles
Street sweepers
Farm machinery
Carts for recreational use
Certifications
IP67 rated