RS PRO KSA 0760 Crimp Tool Crimp Tool for Blue, Insulated Terminals Red, Yellow

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 167,91

(excl. BTW)

€ 203,17

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 5 stuk(s) vanaf 23 februari 2026
  • Plus verzending 52 stuk(s) vanaf 23 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 167,91

*prijsindicatie

RS-stocknr.:
139-704
Artikelnummer Distrelec:
304-02-676
Fabrikant:
RS PRO

Vrijgesteld

Land van herkomst:
SE

RS PRO Comfort Grip Crimp Tool for Pre-insulated Terminals


A strong and powerful crimp tool for insulated terminals/connectors with a cable range of 0.75 to 6.0 mm2/AWG 22 to 10. The crimp operation is effortless, take the striped wire and add the terminal of your choice and crimp a symmetrical oval crimp.;Requiring a greatly reduced hand force due to the unique mechanism the tool allows for both single and two-handed operation. The non-slip allows leverage against a work surface and the built-in ratchet mechanism ensures the jaws fully close to complete the crimp before the finished termination can be released.;Easy to use and if miscrimps or obstructions occur simply use the ratchet release for quick removal ;The RS PRO crimping tool operated with insulated terminal types, also known as Red, Blue and Yellow terminal. See stock numbers 534-238, 534-597, 534-468.

Features and Benefits


  • Non-slip low friction handles ensure a comfortable hand grip

  • Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

  • Unique mechanism significantly reduces hand force required

  • The non-slip pad provides leverage against a work surface

  • Full cycle crimp mechanism to ensure consistent, reliable crimp

  • Ratchet release mechanism to clear miscrimps and obstruction

  • Precision eccentric adjustment for consistent performance and ability to calibrate

  • Hole in handle allows attachment of safety strap for working overhead

  • Lifespan of 50000 cycles

  • High strength hardened alloy Swedish Steel construction

    • What is the difference between un-insulated and insulated crimp tools?


    Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

    The Importance of a High-Quality Crimp


    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

    Why RS PRO?


    Looking to reduce costs but keep the same quality?

    With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.

    Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.

    Gerelateerde Links