Knipex Crimp Tool for Wire Ferrules
- RS-stocknr.:
- 260-1560
- Fabrikantnummer:
- 97 81 180
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 66,19
(excl. BTW)
€ 80,09
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 66,19 |
*prijsindicatie
- RS-stocknr.:
- 260-1560
- Fabrikantnummer:
- 97 81 180
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Crimp Tool | |
| For Use With | Wire Ferrules | |
| Height Safe | No | |
| Overall Length | 180mm | |
| Minimum Wire Size mm² | 0.5 | |
| Maximum Wire Size AWG | 10 | |
| Minimum Wire Size AWG | 20 | |
| Maximum Wire Size mm² | 6 | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Crimp Tool | ||
For Use With Wire Ferrules | ||
Height Safe No | ||
Overall Length 180mm | ||
Minimum Wire Size mm² 0.5 | ||
Maximum Wire Size AWG 10 | ||
Minimum Wire Size AWG 20 | ||
Maximum Wire Size mm² 6 | ||
Niet conform
- Land van herkomst:
- DE
Front crimping tool for wire end ferrules from 0.5 to 6 mm²
Knipex crimping pliers for crimping end sleeves in accordance with DIN 46228 parts 1 and 4. Practical for work in hard-to-reach areas, e.g. in deep and narrow control cabinets.
Features and benefits
PVC-jacket
Capacities mm² / AWG : 0.5 to 6 mm²., AWG 20 to 10";Special tool steel, forged, oil-hardened
Gerelateerde Links
- Knipex Crimp Tool for Wire Ferrules
- Knipex Twistor 16 Crimp Tool for Wire Ferrules
- Knipex 1.5 mm Crimp Tool Crimp Tool for Bootlace Ferrule
- Knipex 97 4.5 mm Crimp Tool for Bootlace Ferrule
- Knipex 97 4 mm Crimp Tool for Bootlace Ferrule
- Facom Crimp Tool Crimp Tool for Wire Ferrules
- CK Crimp Tool Crimp Tool for Wire Ferrules
- Knipex Knipex 97 5867 5 mm Crimp Tool Crimp Tool for Four-Mandrel Crimping Tool