RS PRO Hand Ratcheting Crimp Tool for Wire End Sleeves, 35 → 50mm² Wire

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 246,62

(excl. BTW)

€ 298,41

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 22 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 4 stuk(s) vanaf 24 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 246,62

*prijsindicatie

RS-stocknr.:
683-1617
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Wire Size AWG

10 → 2AWG

Wire Size mm²

35 → 50mm²

Product Type

Crimp Tool

For Use With

Wire End Sleeves

Operation

Hand

Ratcheting

Yes

Height Safe

No

Overall Length

230 mm

Land van herkomst:
SE

Hand Crimp Tools for End Splice Terminals


From the trusted RS PRO brand, a range of “original line” hand crimp tools for both insulated and uninsulated ferrules. The ergonomic ratchet tools produce trapeze crimps, covering a wide range of cables sizes from 0.25 mm² to 50.0 mm². Tools are suitable for both right and left-handed operation.

• Hand tool 683-1605 is for crimping ferrules with a wire size range of 0.5 mm² to 6 mm²

• Hand tool 683-1614 is for crimping ferrules with a wire size range of 10 mm² to 25 mm²

• Hand tool 683-1617 is for crimping ferrules with a wire size range of 35 mm² to 50 mm²

Features and Benefits

● Non-slip main handle and low friction moving handle ensure a comfortable hand grip

● Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

● Full cycle crimp mechanism to ensure consistent, reliable crimp

● Ratchet release mechanism to clear mis-crimps and obstructions

● Precision eccentric adjustment for consistent performance and ability to calibrate

● Each tool has a unique serial number for traceability

● Durable: life span exceeds 50000 cycles

● High strength, through hardened alloy Swedish steel construction

Typical Applications

Crimping tools can be used for a variety of applications:-

• Maintenance & repair

• Electrical Installations

• Cable assemblies

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas- tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Crimp Nest


10.0mm² AWG8;16.0mm² AWG6;25mm² AWG4

Why RS PRO?


RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.

Gerelateerde Links