Fluke I30 Current Clamp, 30 A DC Max, AC/DC Adapter, 20 A AC Max, Current Output, UKAS

RS-stocknr.:: 654-1399
Fabrikantnummer:: FLUKE I30
Fabrikant:: Fluke

Fluke I30 Current Clamp, 30 A DC Max, AC/DC Adapter, 20 A AC Max, Current Output, UKAS

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 792,00

(excl. BTW)

€ 958,32

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

4 stuk(s) klaar voor verzending
Plus verzending 2 stuk(s) vanaf 28 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 792,00

*prijsindicatie

RS-stocknr.:: 654-1399
Fabrikantnummer:: FLUKE I30
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Adapter Type	AC/DC
	Product Type	Current Clamp
	Maximum DC Current	30A
	Maximum AC Current	20A
	Accuracy	±1% + 2 mA
	Maximum Conductor Size	19mm
	Output Type	Current
	Cable Length	1.5m
	Connector Type	4 mm Plug
	Battery Type	Alkaline
	Minimum Operating Temperature	0°C
	Battery Life	30h
	Maximum Operating Temperature	50°C
	Model Number	I30
	Standards/Approvals	IEC 61326-1
	Safety Category Level	CAT III
	Calibrated	UKAS
	Safety Category Voltage	300V

	Alles selecteren
	Merk Fluke
	Adapter Type AC/DC
	Product Type Current Clamp
	Maximum DC Current 30A
	Maximum AC Current 20A
	Accuracy ±1% + 2 mA
	Maximum Conductor Size 19mm
	Output Type Current
	Cable Length 1.5m
	Connector Type 4 mm Plug
	Battery Type Alkaline
	Minimum Operating Temperature 0°C
	Battery Life 30h
	Maximum Operating Temperature 50°C
	Model Number I30
	Standards/Approvals IEC 61326-1
	Safety Category Level CAT III
	Calibrated UKAS
	Safety Category Voltage 300V

N.v.t.

Fluke Current Clamp, 20A Maximum AC Current, 30A Maximum DC Current - i30

This current clamp provides non-intrusive measurement of both DC and AC currents using Hall-effect sensing, and is intended for connection to multimeters and recording instruments in industrial and laboratory environments. It supports accurate current monitoring across a broad frequency range and operates within typical workshop temperature and humidity conditions.

Features & Benefits

• ±1% of reading ±2 mA accuracy for precise measurements
• 30 mA–30 A DC and 30 mA–20 A AC usable ranges for versatility
• Output sensitivity 100 mV/A for easy interfacing with meters
• Frequency response DC–20 kHz to capture high-frequency components
• 19mm conductor capacity enabling single-core clamp-on testing
• Battery powered for approximately 30 h with low-battery indication

Applications

• Suitable for troubleshooting motor-drive and inverter outputs
• Ideal for commissioning control panels and industrial automation
• Used with digital multimeters for maintenance checks on DC systems
• Can be used for field recording of transient currents in test rigs

What output connection is provided for instrument linking?

A 4mm safety connector supplies the analogue current-proportional output compatible with standard test leads.

How does ambient temperature affect measurement stability?

The temperature coefficient is ±0.01% of reading/°C, enabling predictable drift with environmental change.

What electrical safety and EMC provisions apply to this tool?

It meets Class CAT III 300V working voltage requirements and complies with EMC standards under IEC 61326-1.

What mounting or zeroing controls are available during use?

Output zero is adjusted manually via a thumbwheel to compensate for offset before measurement.

What supply and loading conditions ensure accurate readings?

Use a 9V alkaline PP3 battery and connect to instruments with input impedance greater than 10 kΩ and capacitance up to 100 pF.

Warning

Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.

Supplied with

Alkaline PP3 battery and operators manual.