Fluke i400 Current Clamp, AC Adapter, 400 A ac AC Max, Current Output, RSCAL

RS-stocknr.:: 810-6014
Fabrikantnummer:: Fluke i400
Fabrikant:: Fluke

Fluke i400 Current Clamp, AC Adapter, 400 A ac AC Max, Current Output, RSCAL

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 332,00

(excl. BTW)

€ 401,72

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

9 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 332,00

*prijsindicatie

RS-stocknr.:: 810-6014
Fabrikantnummer:: Fluke i400
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Adapter Type	AC
	Product Type	Current Clamp
	Maximum AC Current	400A ac
	Accuracy	± 2 % + 0.06 A
	Maximum Conductor Size	32mm
	Output Type	Current
	Cable Length	1.5m
	Connector Type	Banana Jack
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Model Number	i400
	Standards/Approvals	No
	Safety Category Voltage	600, 1000V
	Safety Category Level	CAT IV, CAT III
	Calibrated	RSCAL

	Alles selecteren
	Merk Fluke
	Adapter Type AC
	Product Type Current Clamp
	Maximum AC Current 400A ac
	Accuracy ± 2 % + 0.06 A
	Maximum Conductor Size 32mm
	Output Type Current
	Cable Length 1.5m
	Connector Type Banana Jack
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Model Number i400
	Standards/Approvals No
	Safety Category Voltage 600, 1000V
	Safety Category Level CAT IV, CAT III
	Calibrated RSCAL

Vrijgesteld

Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size - Fluke i400

This current clamp is a Compact AC clamp designed to work with digital multimeters to measure alternating current without interrupting circuits. It delivers an output proportional to measured current for straightforward interfacing with meters and is intended for use in demanding electrical environments where high safety ratings are required.

Features & Benefits

• Measures up to 400A while allowing continuous operation at working currents
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks

Applications

• Suitable for plant maintenance teams performing load analysis
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter

What conductor sizes can it clamp around?

It accepts conductors up to 32mm diameter and accommodates large busbar sizes specified as 750MCM.

How does it behave at temperatures encountered on site?

It is rated to operate safely between 0°C and 50°C for typical ambient working conditions.

What is the maximum non-destructive current it can withstand?

The device can tolerate short-term currents up to 1000A without permanent damage.

How low a current can it reliably detect?

The lowest measurable current is 1A, suitable for detecting light loads and standby currents.