Fluke I410 Current Clamp, 400 A DC Max, AC/DC Adapter, 400 A ac AC Max, Voltage Output, RSCAL
- RS-stocknr.:
- 459-2991
- Fabrikantnummer:
- 1640967
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 503,00
(excl. BTW)
€ 608,63
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- Plus verzending 3 stuk(s) vanaf 04 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 503,00 |
*prijsindicatie
- RS-stocknr.:
- 459-2991
- Fabrikantnummer:
- 1640967
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Adapter Type | AC/DC | |
| Product Type | Current Clamp | |
| Maximum DC Current | 400A | |
| Maximum AC Current | 400A ac | |
| Accuracy | ±3.5 % + 0.5 A | |
| Maximum Conductor Size | 32mm | |
| Cable Length | 1.6m | |
| Output Type | Voltage | |
| Connector Type | 4 mm Plug | |
| Battery Life | 60h | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | No | |
| Model Number | I410 | |
| Calibrated | RSCAL | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 600V | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Adapter Type AC/DC | ||
Product Type Current Clamp | ||
Maximum DC Current 400A | ||
Maximum AC Current 400A ac | ||
Accuracy ±3.5 % + 0.5 A | ||
Maximum Conductor Size 32mm | ||
Cable Length 1.6m | ||
Output Type Voltage | ||
Connector Type 4 mm Plug | ||
Battery Life 60h | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals No | ||
Model Number I410 | ||
Calibrated RSCAL | ||
Safety Category Level CAT III | ||
Safety Category Voltage 600V | ||
Vrijgesteld
- Land van herkomst:
- TH
Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size - 1640967
This current clamp is a battery-powered Hall-effect probe designed to extend multimeter capabilities for measuring AC and DC currents up to 400A. It provides a voltage-type output for use with standard meters and opens access to confined conductors with a large clamp jaw while meeting CAT III 600V safety requirements.
Features & Benefits
• 1 mV/A output enables straightforward meter readings
• ±3.5% current clamp accuracy ensures measurement consistency
• 1A to 400 A continuous range covers common industrial loads
• DC–3kHz frequency response supports varied signal types
• 60 h battery life for extended field use
• 1.6m cable with 4mm plug for flexible connections
• ±3.5% current clamp accuracy ensures measurement consistency
• 1A to 400 A continuous range covers common industrial loads
• DC–3kHz frequency response supports varied signal types
• 60 h battery life for extended field use
• 1.6m cable with 4mm plug for flexible connections
**Applications**
• Suitable for in-situ HVAC current measurements on compressors and fans
• Ideal for electrical maintenance troubleshooting on distribution panels
• Used with multimeters for control-panel commissioning and servicing
• Can be used for fault-finding in automation and motor-drive installations
• Ideal for electrical maintenance troubleshooting on distribution panels
• Used with multimeters for control-panel commissioning and servicing
• Can be used for fault-finding in automation and motor-drive installations
What conductor sizes can be accommodated by the clamp?
The jaw accepts conductors up to 32mm diameter so single insulated cables and small multi-core runs can be measured without disconnection.
How does the device Interface with a multimeter?
It delivers a voltage output proportional to current (1 mV per amp) via a 1.6m lead terminated with shrouded 4 mm plugs for direct plugging into most meters.
What environmental temperatures can it operate in?
It functions across an ambient range from -10°C to 50°C, suitable for most workshop and site conditions.
Gerelateerde Links
- Fluke I410 Current Clamp AC/DC Adapter Voltage Output
- Fluke I410 Current Clamp AC/DC Adapter Voltage Output - UKAS
- Fluke i400s Current Clamp, 400 A ac AC Max - RSCAL
- Fluke 87V L215 Multimeter Kit, RSCAL
- Fluke i400 Current Clamp 400 A ac AC Max, Current Output - RSCAL
- Fluke I30 Current Clamp AC/DC Adapter Current Output - RSCAL
- Fluke I310S Current Clamp AC/DC Adapter Voltage Output - RSCAL
- RS PRO Current Clamp AC/DC Adapter Current Output - RSCAL