MPS MCS1806GS-3-05-P, Hall Effect Sensor IC 8-Pin, SOIC-8
- RS-stocknr.:
- 337-058
- Fabrikantnummer:
- MCS1806GS-3-05-P
- Fabrikant:
- MPS
Subtotaal (1 rol van 500 eenheden)*
€ 1.348,00
(excl. BTW)
€ 1.631,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 500 + | € 2,696 | € 1.348,00 |
*prijsindicatie
- RS-stocknr.:
- 337-058
- Fabrikantnummer:
- MCS1806GS-3-05-P
- Fabrikant:
- MPS
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | MPS | |
| Offset Voltage | ±5 mV | |
| Product Type | Hall Effect Sensor IC | |
| Package Type | SOIC-8 | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk MPS | ||
Offset Voltage ±5 mV | ||
Product Type Hall Effect Sensor IC | ||
Package Type SOIC-8 | ||
Pin Count 8 | ||
Mount Type Surface | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- Land van herkomst:
- CN
The MPS International Ltd Linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows the current to flow close to the IC, which contains high accuracy Hall effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current. A spinning current technique is used for a low, stable offset.
Adjustable bandwidth up to 100kHz
Ratiometric output from supply voltage
Output proportional to the AC or DC currents
Factory trimmed for accuracy
No magnetic hysteresis