Knipex Knipex Precision Diagonal Cutter
- RS-stocknr.:
- 187-8337
- Fabrikantnummer:
- 77 12 115
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 58,02
(excl. BTW)
€ 70,20
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 13 stuk(s) vanaf 05 januari 2026
- Plus verzending 15 stuk(s) vanaf 05 januari 2026
- Plus verzending 3 stuk(s) vanaf 12 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 58,02 |
*prijsindicatie
- RS-stocknr.:
- 187-8337
- Fabrikantnummer:
- 77 12 115
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Model Number | Knipex | |
| Cutter Type | Precision Diagonal Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Chrome-Plated Steel with Ball Bearings | |
| Maximum Cutting Capacity | 1.6mm | |
| Cutting Capacity Medium Hard Wire | 1.2mm | |
| Cutting Capacity Soft Steel Wire | 1.2mm | |
| Cutting Capacity Soft Wire | 1.6mm | |
| Cutting Capacity Copper Wire | 1.6mm | |
| Cutting Capacity Stranded Wire | 0.6mm | |
| Cut Type | With Bevel | |
| Cutting Capacity Hard Wire | 0.6mm | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Model Number Knipex | ||
Cutter Type Precision Diagonal Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Chrome-Plated Steel with Ball Bearings | ||
Maximum Cutting Capacity 1.6mm | ||
Cutting Capacity Medium Hard Wire 1.2mm | ||
Cutting Capacity Soft Steel Wire 1.2mm | ||
Cutting Capacity Soft Wire 1.6mm | ||
Cutting Capacity Copper Wire 1.6mm | ||
Cutting Capacity Stranded Wire 0.6mm | ||
Cut Type With Bevel | ||
Cutting Capacity Hard Wire 0.6mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Electronic side cutter
Tools with precision box joint and captive, low-friction double spring
Special tool steel, oil hardened and tempered
Mirror finish with good rust protection
Two-component handles for easy use
Special tool steel, oil hardened and tempered
Mirror finish with good rust protection
Two-component handles for easy use
Standards
DIN ISO 9654
Wire cutter small bevel 115mm
Features / Benefits :
With thread clamp
Optimized shape for a more direct feel
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Cutting edges additionally laser hardened to at least 60 HRC
Thin sheaths on the head of the pliers ensure safe and comfortable guidance, even between thumb and forefinger
Round head with bevel and wire clamp
No more uncontrolled throwing of cut wire pieces
Cutting edge hardness approx. 62 HRC
Optimized shape for a more direct feel
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Cutting edges additionally laser hardened to at least 60 HRC
Thin sheaths on the head of the pliers ensure safe and comfortable guidance, even between thumb and forefinger
Round head with bevel and wire clamp
No more uncontrolled throwing of cut wire pieces
Cutting edge hardness approx. 62 HRC
Cutting head: tool steel in special quality, forged, oil-hardened.