Knipex Knipex Precision Diagonal Cutter
- RS-stocknr.:
- 247-3265
- Artikelnummer Distrelec:
- 180-53-290
- Fabrikantnummer:
- 77 02 115
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 52,07
(excl. BTW)
€ 63,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 28 stuk(s) vanaf 05 januari 2026
- Plus verzending 40 stuk(s) vanaf 05 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 52,07 |
*prijsindicatie
- RS-stocknr.:
- 247-3265
- Artikelnummer Distrelec:
- 180-53-290
- Fabrikantnummer:
- 77 02 115
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Model Number | Knipex | |
| Cutter Type | Precision Diagonal Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Chrome-Plated Steel with Ball Bearings | |
| Maximum Cutting Capacity | 1.6mm | |
| Cutting Capacity Hard Wire | 0.6mm | |
| Cutting Capacity Copper Wire | 1.6mm | |
| Cutting Capacity Medium Hard Wire | 1.2mm | |
| Cutting Capacity Stranded Wire | 0.6mm | |
| Cut Type | Small Bevel | |
| Cutting Capacity Soft Wire | 1.6mm | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Model Number Knipex | ||
Cutter Type Precision Diagonal Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Chrome-Plated Steel with Ball Bearings | ||
Maximum Cutting Capacity 1.6mm | ||
Cutting Capacity Hard Wire 0.6mm | ||
Cutting Capacity Copper Wire 1.6mm | ||
Cutting Capacity Medium Hard Wire 1.2mm | ||
Cutting Capacity Stranded Wire 0.6mm | ||
Cut Type Small Bevel | ||
Cutting Capacity Soft Wire 1.6mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Electronic small bevel cutter 115mm - KNIPEX - 77 02 115
The Knipex electronic diagonal cutter is mainly used for clean cutting of fine copper wires, including at the cutting edge, but can also be used in electronics and fine mechanics.
Features / Benefits :
Electronics Side Cutter Round Head with Spring - 115 mm
For delicate cutting work, e.g. in electronics and precision mechanics
Optimised shape for a more direct feel - Robust, backlash-free interlocking hinge
Low-friction double spring for opening the pliers For delicate cutting tasks, e.g. in the fields of electronics and precision mechanics
Optimised shape for a more direct feel
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth, even opening of the pliers
Mirror polishing in combination with the thin oil layer provides good protection against rust, The mirror polish in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Laser-strengthened cutting edges with a hardness of at least 60 HRC
Thin sheaths on the pliers head ensure safe and comfortable guidance, even between thumb and forefinger
Round head with small bevel
Cutting edge hardness of approx. 60 HRC
Cutting head: tool steel in special quality, forged, oil-hardened
For delicate cutting work, e.g. in electronics and precision mechanics
Optimised shape for a more direct feel - Robust, backlash-free interlocking hinge
Low-friction double spring for opening the pliers For delicate cutting tasks, e.g. in the fields of electronics and precision mechanics
Optimised shape for a more direct feel
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth, even opening of the pliers
Mirror polishing in combination with the thin oil layer provides good protection against rust, The mirror polish in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Laser-strengthened cutting edges with a hardness of at least 60 HRC
Thin sheaths on the pliers head ensure safe and comfortable guidance, even between thumb and forefinger
Round head with small bevel
Cutting edge hardness of approx. 60 HRC
Cutting head: tool steel in special quality, forged, oil-hardened