Renesas Electronics ISL90727WIE627Z-T7A Digital Potentiometer 128-Position 10 kΩ Linear 1-Channel 6-Pin SC-70
- RS-stocknr.:
- 193-1541
- Fabrikantnummer:
- ISL90727WIE627Z-T7A
- Fabrikant:
- Renesas Electronics
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 193-1541
- Fabrikantnummer:
- ISL90727WIE627Z-T7A
- Fabrikant:
- Renesas Electronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Renesas Electronics | |
| Product Type | Digital Potentiometer | |
| Resistance | 10kΩ | |
| Number of Positions | 128 | |
| Taper Type | Linear | |
| Temperature Coefficient | 45 ppm/°C | |
| Memory Type | Volatile | |
| Number of Pots per Package | 1 | |
| Interface Type | Serial-I2C | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 1.35mm | |
| Standards/Approvals | Pb-Free (RoHS) | |
| Series | ISL907 | |
| Height | 1mm | |
| Length | 2.15mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Renesas Electronics | ||
Product Type Digital Potentiometer | ||
Resistance 10kΩ | ||
Number of Positions 128 | ||
Taper Type Linear | ||
Temperature Coefficient 45 ppm/°C | ||
Memory Type Volatile | ||
Number of Pots per Package 1 | ||
Interface Type Serial-I2C | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 1.35mm | ||
Standards/Approvals Pb-Free (RoHS) | ||
Series ISL907 | ||
Height 1mm | ||
Length 2.15mm | ||
Automotive Standard No | ||
The Intersil ISL90727 and ISL90728 are digitally controlled potentiometers (XDCP™). Each device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an I2 C Bus™.
The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the SDA and SCL inputs.
Volatile Solid-State Potentiometer
I2C Serial Bus Interface
DCP Terminal Voltage, 2.7V to 5.5V
Low Tempco
Rheostat - 45 ppm/°C Typical
Divider - 15 ppm/°C Typical
128 Wiper Tap Points
Wiper Resistance 70Ω Typ at VCC = 3.3V
Low Power CMOS
Active Current, 200μA Max
Standby Current, 500nA Max
Available RTOTAL Values = 50kΩ, 10kΩ
Power-on Preset to Midscale
Packaging
6 Ld SC-70
Pb-Free
Gerelateerde Links
- Renesas Electronics ISL90727WIE627Z-T7A Digital Potentiometer 128-Position 10 kΩ Linear 1-Channel 6-Pin SC-70
- Renesas Electronics ISL90727WIE627Z-TK Digital Potentiometer 128-Position 10 kΩ Linear 1-Channel 6-Pin SC-70
- Renesas Electronics ISL90728WIE627Z-TK Digital Potentiometer 128-Position 0.07 kΩ Linear 6-Pin SC-70
- MCP4017T-104E/LT SC-70
- MCP40D18T-503E/LT SC-70
- Microchip Digital Potentiometer 128-Position 10 kΩ Linear 1-Channel 6-Pin SC-70
- Microchip Digital Potentiometer 128-Position 50 kΩ Linear 1-Channel 6-Pin SC-70
- Microchip Digital Potentiometer 128-Position 100 kΩ Linear 1-Channel 6-Pin SC-70