PULS CP DIN Rail Power Supply, 100 → 240 V ac, 110 → 300 V dc ac, dc Input, 24V dc dc Output, 5A Output,

RS-stocknr.:: 181-2488
Fabrikantnummer:: CP5.242
Fabrikant:: PULS

PULS CP DIN Rail Power Supply, 100 → 240 V ac, 110 → 300 V dc ac, dc Input, 24V dc dc Output, 5A Output,

18 op voorraad - levertijd is 1 werkdag(en)

Prijs Per stuk

€ 169,51

(excl. BTW)

€ 205,11

(incl. BTW)

Aantal stuks	Per stuk
1 +	€ 169,51

RS-stocknr.:: 181-2488
Fabrikantnummer:: CP5.242
Fabrikant:: PULS

Datasheets

Datasheet

Wetgeving en compliance

Land van herkomst:: CZ

Productomschrijving

PULS DIN Rail Power Supply

The PULS DIN rail panel mount power supply has an input voltage range from 100VAC to 240VAC. The output current is 5A and the maximum input current is 1.09A. It can deliver three times the nominal output current for at least 12ms which helps to trip fuses on faulty output branches. The switch mode PULS series is a single phase DIN rail mounting type power supply.

Features and Benefits

• 20% output power reserves
• Active power factor correction
• Efficiency up to 94.3%
• Excellent partial load efficiency
• Minimal inrush surge current
• Overload protection
• Practical handling
• Short circuit protection

Applications

• ITE commercials

Certifications

• CE certified
• CULus listed
• IEC
• UL approved

Specificaties

Kenmerk	Waarde
Series	CP
Electrical Phase	1
AC or DC Input Voltage	ac, dc
Input Voltage	100 → 240 V ac, 110 → 300 V dc
AC or DC Output Voltage	dc
Output Voltage	24V dc
Output Current	5A
Power Rating	120W
Number of Outputs	1
Dimensions	32 x 102 x 124mm
Width	32mm
Depth	102mm
Height	124mm
Ripple And Noise	200mV Pk-Pk
Efficiency	94.3%
Minimum Temperature	-25°C
Maximum Temperature	+70°C
Load Regulation	50mV
Output Voltage Adjustment Range	24 → 28V
MTBF	100h
Standards Met	ANSI/UL 61010-2-201, CE Certified, cULus Listed, IECEE IEC 60950-1, IECEE IEC 61010-2-201, UL 508
Mounting Type	DIN Rail Mount