WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, DPDT
- RS-stocknr.:
- 180-3039
- Artikelnummer Distrelec:
- 304-10-815
- Fabrikantnummer:
- 788-390
- Fabrikant:
- WAGO
Subtotaal (1 eenheid)*
€ 23,21
(excl. BTW)
€ 28,08
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 31 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 23,21 |
*prijsindicatie
- RS-stocknr.:
- 180-3039
- Artikelnummer Distrelec:
- 304-10-815
- Fabrikantnummer:
- 788-390
- Fabrikant:
- WAGO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | WAGO | |
| Coil Voltage | 24V dc | |
| Product Type | Interface Relay | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Series | 788 | |
| Terminal Type | Cage Clamp | |
| Switching Current | 8A | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 250V ac | |
| Switching DC Voltage | 24V dc | |
| Contact Material | Silver Alloy | |
| Maximum Operating Temperature | 70°C | |
| Length | 15mm | |
| Width | 86mm | |
| Standards/Approvals | EN 61373 | |
| Height | 73mm | |
| Alles selecteren | ||
|---|---|---|
Merk WAGO | ||
Coil Voltage 24V dc | ||
Product Type Interface Relay | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Series 788 | ||
Terminal Type Cage Clamp | ||
Switching Current 8A | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 250V ac | ||
Switching DC Voltage 24V dc | ||
Contact Material Silver Alloy | ||
Maximum Operating Temperature 70°C | ||
Length 15mm | ||
Width 86mm | ||
Standards/Approvals EN 61373 | ||
Height 73mm | ||
- Land van herkomst:
- DE
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Path, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Gerelateerde Links
- WAGO 788 Series Interface Relay 24V dc Coil 19mA
- WAGO 788 Series Interface Relay 12V dc Coil 36mA
- WAGO 788 Series Interface Relay 24V ac Coil 34mA
- WAGO 788 Series Relay Module 230V ac Coil 4mA
- WAGO 788 Series Relay Module 230V ac Coil 5mA
- WAGO 788 Series Relay Module 24V ac Coil 32mA
- WAGO 788 Series Relay Module 115V ac Coil 8mA
- WAGO 788 Series Relay Module 48V dc Coil 11mA