WAGO 788 Series Interface Relay, DIN Rail, 24V ac Coil, DPDT, 34mA
- RS-stocknr.:
- 180-3040
- Fabrikantnummer:
- 788-512
- Fabrikant:
- WAGO
Subtotaal (1 eenheid)*
€ 15,76
(excl. BTW)
€ 19,07
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 46 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 60 stuk(s) vanaf 16 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 15,76 |
*prijsindicatie
- RS-stocknr.:
- 180-3040
- Fabrikantnummer:
- 788-512
- Fabrikant:
- WAGO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | WAGO | |
| Product Type | Interface Relay | |
| Coil Voltage | 24V ac | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Series | 788 | |
| Terminal Type | Cage Clamp | |
| Switching Current | 8A | |
| Switching AC Voltage | 250V ac | |
| Switching DC Voltage | 24V dc | |
| Minimum Operating Temperature | -25°C | |
| Coil Current | 34mA | |
| Maximum Operating Temperature | 50°C | |
| Contact Material | Silver Alloy | |
| Standards/Approvals | EN 61373 | |
| Height | 54mm | |
| Length | 15mm | |
| Width | 15mm | |
| Alles selecteren | ||
|---|---|---|
Merk WAGO | ||
Product Type Interface Relay | ||
Coil Voltage 24V ac | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Series 788 | ||
Terminal Type Cage Clamp | ||
Switching Current 8A | ||
Switching AC Voltage 250V ac | ||
Switching DC Voltage 24V dc | ||
Minimum Operating Temperature -25°C | ||
Coil Current 34mA | ||
Maximum Operating Temperature 50°C | ||
Contact Material Silver Alloy | ||
Standards/Approvals EN 61373 | ||
Height 54mm | ||
Length 15mm | ||
Width 15mm | ||
- Land van herkomst:
- DE
Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Gerelateerde Links
- WAGO 788 Series Relay Module 24V ac Coil 34mA
- WAGO 788 Series Interface Relay 24V dc Coil, DPDT
- WAGO 788 Series Interface Relay 24V dc Coil 19mA
- WAGO 788 Series Interface Relay 12V dc Coil 36mA
- WAGO 788 Series Relay Module 230V ac Coil 4mA
- WAGO 788 Series Relay Module 230V ac Coil 5mA
- WAGO 788 Series Relay Module 24V ac Coil 32mA
- WAGO 788 Series Relay Module 115V ac Coil 8mA