Keysight Technologies N3000A Series Electronic Load, 0 → 150 W, 0 → 60 V, 0 → 30 A

Afbeelding representeert productcategorie

Bekijk alle Electronic Loads

Subtotaal (1 eenheid)*

€ 2.448,00

(excl. BTW)

€ 2.962,08

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 24 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 2.448,00

*prijsindicatie

RS-stocknr.:
690-9603
Artikelnummer Distrelec:
301-50-485
Fabrikantnummer:
N3302A
Fabrikant:
Keysight Technologies
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Keysight Technologies

Series

N3000A

Load Type

Programmable

Constant Voltage Mode Range

0 → 60 V

Constant Current Mode Range

0 → 30 A

Constant Resistance Mode Range

0.067 → 4 Ω

Constant Wattage Mode Range

0 → 150 W

N.v.t.

Land van herkomst:
MY

N3300A Series Electronic Loads


This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It holds user-determined permutations of the N3302A (150W), N3303A & N3307A (250W) and N3304A (300W) modules (one slot each) and N3305A (500W) and N3306A (600W) modules (two slots each). This gives up to 1800W of power, with one GPIB address providing complete control and readback of all the load modules within a single mainframe. The half-rack width N3301A mainframe has two slots.

GPIB and RS-232 control of current, voltage and resistance
GPIB and RS-232 readback of current, voltage and power
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Full protection from over-current, over-voltage, over-power, over-temperature and reverse polarity
Electronic calibration
Trigger for external synchronization
Parallel units in constant current mode for higher power
VXI plug&play drivers

Note

For mounting the N3300A two off Rack Mount Kits 713-4270 will be required.

Note

Manufacturer’s Warranty

Gerelateerde Links