Banner SSA-EB Series Twist Release Emergency Stop Push Button, Surface Mount, 1 NC, IP65
- RS-stocknr.:
- 232-5275
- Fabrikantnummer:
- SSA-EB1PLXR-12ED1Q8
- Fabrikant:
- Banner
Subtotaal (1 eenheid)*
€ 280,12
(excl. BTW)
€ 338,95
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 07 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 280,12 |
*prijsindicatie
- RS-stocknr.:
- 232-5275
- Fabrikantnummer:
- SSA-EB1PLXR-12ED1Q8
- Fabrikant:
- Banner
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Banner | |
| Mount Type | Surface Mount | |
| Product Type | Emergency Stop Push Button | |
| Contact Configuration | 1 NC | |
| Housing Material | Polycarbonate, Aluminium, Polyamide | |
| Push Button Actuation | Twist Release | |
| Illuminated | No | |
| Series | SSA-EB | |
| IP Rating | IP65 | |
| Terminal Type | M12 Connector | |
| Number of Auxiliary Contacts | 1 | |
| Contact DC Voltage | 75V dc | |
| Contact AC Voltage | 60V ac | |
| Contact Current | 2A | |
| Head Style | Mushroom Shaped | |
| Switch Configuration | Latch | |
| Standards/Approvals | ANSI B11.19, EN 60497-1 / -5-1, IEC/EN 60204-1, NFPA 79, ISO 13850 | |
| Hazardous Area Certification | No | |
| Head Diameter | 60mm | |
| Safety Contacts | 2 | |
| Alles selecteren | ||
|---|---|---|
Merk Banner | ||
Mount Type Surface Mount | ||
Product Type Emergency Stop Push Button | ||
Contact Configuration 1 NC | ||
Housing Material Polycarbonate, Aluminium, Polyamide | ||
Push Button Actuation Twist Release | ||
Illuminated No | ||
Series SSA-EB | ||
IP Rating IP65 | ||
Terminal Type M12 Connector | ||
Number of Auxiliary Contacts 1 | ||
Contact DC Voltage 75V dc | ||
Contact AC Voltage 60V ac | ||
Contact Current 2A | ||
Head Style Mushroom Shaped | ||
Switch Configuration Latch | ||
Standards/Approvals ANSI B11.19, EN 60497-1 / -5-1, IEC/EN 60204-1, NFPA 79, ISO 13850 | ||
Hazardous Area Certification No | ||
Head Diameter 60mm | ||
Safety Contacts 2 | ||
- Land van herkomst:
- US
The Banner mushroom-style electro-mechanical emergency stop push buttons are rugged design, easy installation with no assembly or individual wiring required. “Safe Break Action” ensures normally closed (NC) contacts will open if the contact block is separated from the actuator. It has a flat mounting base for ease of mounting without requiring an additional enclosure.
Contact rating 2 A @ 24 V dc
Contact quantity 2 NC, 1 NO
8-pin M12 quick disconnect
The EZ-LIGHT® illumination logic allows for easy identification of a pushed/actuated button. An armed button will light a steady yellow or green illumination or off (depending on model), a pushed/actuated button is indicated by a red illumination flashing
Gerelateerde Links
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 1 NC, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button 14.5 mm Cutout, DPST
- Banner Twist Release Emergency Stop Push Button 1 NC
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP67, IP65