Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Surface, 30 mm Cutout, 1 NO/2 NC, IP65
- RS-stocknr.:
- 840-3040
- Fabrikantnummer:
- SSA-EB1PLXR-12ECQ8
- Fabrikant:
- Banner
Subtotaal (1 eenheid)*
€ 286,19
(excl. BTW)
€ 346,29
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 79 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 46 stuk(s) vanaf 05 oktober 2026
- Plus verzending 27 stuk(s) vanaf 02 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 286,19 |
*prijsindicatie
- RS-stocknr.:
- 840-3040
- Fabrikantnummer:
- SSA-EB1PLXR-12ECQ8
- Fabrikant:
- Banner
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Banner | |
| Product Type | Emergency Stop Push Button | |
| Mount Type | Surface | |
| Cutout Diameter | 30mm | |
| Contact Configuration | 1 NO/2 NC | |
| Push Button Actuation | Twist Release | |
| Housing Material | Polycarbonate, Polyamide | |
| Series | SSA-EB | |
| Illuminated | Yes | |
| IP Rating | IP65 | |
| Colour | Red, Yellow | |
| Terminal Type | M12 Connector | |
| Contact DC Voltage | 75V dc | |
| Contact AC Voltage | 60V ac | |
| Contact Current | 2A | |
| Head Style | Round | |
| Head Diameter | 40mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | No | |
| Length | 119.8mm | |
| Width | 33mm | |
| Safety Contacts | NC | |
| Push Button Material | Polyamide | |
| Alles selecteren | ||
|---|---|---|
Merk Banner | ||
Product Type Emergency Stop Push Button | ||
Mount Type Surface | ||
Cutout Diameter 30mm | ||
Contact Configuration 1 NO/2 NC | ||
Push Button Actuation Twist Release | ||
Housing Material Polycarbonate, Polyamide | ||
Series SSA-EB | ||
Illuminated Yes | ||
IP Rating IP65 | ||
Colour Red, Yellow | ||
Terminal Type M12 Connector | ||
Contact DC Voltage 75V dc | ||
Contact AC Voltage 60V ac | ||
Contact Current 2A | ||
Head Style Round | ||
Head Diameter 40mm | ||
Hazardous Area Certification No | ||
Standards/Approvals No | ||
Length 119.8mm | ||
Width 33mm | ||
Safety Contacts NC | ||
Push Button Material Polyamide | ||
Banner Emergency Stop Push Button, 2A Current Rating, 40mm Button Head Diameter - SSA-EB Series - SSA-EB1PLXR-12ECQ8
Halt equipment in its tracks with this emergency stop push button from Banner. It cuts the power to a machine immediately when pressed, helping to prevent equipment damage and injuries. As it has an IP65 rating, this unit is fully protected against dust and low-pressure water jets, so it stays strong in tough industrial environments. Its bright red and yellow housing means it catches your eye in busy workspaces. Thanks to its latching mechanism, the push button stays down until you reset it, so faulty kit can't accidentally power up.
• Simple twist-release actuator for quick resets
• Contact block opens NC contacts automatically if the actuator disconnects to stop damage from assembly faults
• Large push button head diameter of 40mm makes it a cinch to press
• M12 quick-disconnect port for ease of use
Applications
• Industrial automation
• Packaging industry
• Heavy engineering
How can I tell that this emergency stop push button is activated?
The device's actuator lights up when it disconnects your equipment, so you can tell if it's active in a flash.
Gerelateerde Links
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 1 NC, IP65
- Banner SSA-EB Series Pull/Twist to Release Illuminated Emergency Stop Push Button Threaded Mount, 30 mm
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP65 IP67
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button 14.5 mm Cutout, DPST
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP67, IP65