SMC 1/2 in FRL Assembly, Automatic Drain, 5 μm Filtration Size Integrated Pressure Gauge

RS-stocknr.:: 255-3216
Fabrikantnummer:: AC40A-F04DE-D
Fabrikant:: SMC

SMC 1/2 in FRL Assembly, Automatic Drain, 5 μm Filtration Size Integrated Pressure Gauge

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 158,45

(excl. BTW)

€ 191,72

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 27 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,45

*prijsindicatie

RS-stocknr.:: 255-3216
Fabrikantnummer:: AC40A-F04DE-D
Fabrikant:: SMC

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SMC
	Port Size	1/2 in
	Product Type	FRL Assembly
	Integrated Pressure Gauge	Yes
	Maximum Flow Rate	6500L/min
	Connection Thread Standard	G
	Drain Type	Automatic
	Series	AC
	Filtration Size	5μm
	Pressure Gauge Port Size	1/8 in
	Overall Length	280mm
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Maximum Operating Pressure	10 bar
	Standards/Approvals	RoHS
	Overall Width	105mm
	Overall Height	270mm
	Bowl Material	Polycarbonate
	Pressure Setting Range	0.05 to 0.85 MPa

	Alles selecteren
	Merk SMC
	Port Size 1/2 in
	Product Type FRL Assembly
	Integrated Pressure Gauge Yes
	Maximum Flow Rate 6500L/min
	Connection Thread Standard G
	Drain Type Automatic
	Series AC
	Filtration Size 5μm
	Pressure Gauge Port Size 1/8 in
	Overall Length 280mm
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Maximum Operating Pressure 10 bar
	Standards/Approvals RoHS
	Overall Width 105mm
	Overall Height 270mm
	Bowl Material Polycarbonate
	Pressure Setting Range 0.05 to 0.85 MPa

SMC Series AC FRL Assembly, 6500L/min Maximum Flow Rate, 10 Bar Maximum Operating Pressure - AC40A-F04DE-D

This frl assembly prepares and conditions compressed Air for industrial control and actuation systems by combining filtration, pressure regulation and lubrication in a single unit. It is designed for general pneumatic supply lines, offering relief-type exhaust behaviour and an embedded square pressure gauge with limit indicator to assist system monitoring.

Features & Benefits

• 5 μm filtration for particle removal and extended downstream life
• 0.05 to 0.85 MPa regulator range for precise pressure control
• 6500 L/min maximum flow to support high-demand circuits
• Automatic float drain for unattended condensate removal
• Polycarbonate bowl with lubricator for visible oil reservoir
• G-thread ports including 1/8 in gauge port for standard connections

Applications

• Suitable for pneumatic actuator supply in automation cells
• Ideal for control panels requiring Compact Air preparation
• used with industrial valves needing regulated, lubricated Air
• Can be used for pneumatic test benches with high flow demand

What temperature range can it operate within?

It functions between -5°C and +60°C without freezing, applicable to typical plant environments.

What pressures can the unit withstand during operation?

The maximum working pressure is 10 bar and proof pressure is 1.5 MPa for short-term conditions.

How much lubricant and condensate capacity does it provide?

The lubricator holds 135 cm³ of oil and the drain capacity is 45 cm³ for condensate collection.

What mounting orientation and flow direction should be observed?

Install with flow from left to right as marked to ensure correct internal sequencing and relieving exhaust operation.