Nexperia 74HC123D,653 2 Monostable Multivibrator 74HC, 16-Pin SO

RS-stocknr.:: 170-7994
Fabrikantnummer:: 74HC123D,653
Fabrikant:: Nexperia

Nexperia 74HC123D,653 2 Monostable Multivibrator 74HC, 16-Pin SO

Subtotaal (1 rol van 2500 eenheden)*

€ 427,50

(excl. BTW)

€ 517,50

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk	Per rol*
2500 +	€ 0,171	€ 427,50

*prijsindicatie

RS-stocknr.:: 170-7994
Fabrikantnummer:: 74HC123D,653
Fabrikant:: Nexperia

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Logic Family	74HC
	Product Type	Monostable Multivibrator
	Input Type	Edge Triggered
	Mount Type	Surface
	Minimum Supply Voltage	2V
	Package Type	SO
	Maximum Supply Voltage	6V
	Pin Count	16
	Maximum Propagation Delay Time @ CL	65ns
	Flip-Flop Type	Monostable Multivibrator
	Trigger Type	Dual Retriggerable Monostable
	Minimum Operating Temperature	-40°C
	Number of Elements per Chip	2
	Maximum Operating Temperature	125°C
	Length	10mm
	Standards/Approvals	No
	Series	74HC123
	Height	1.45mm
	Automotive Standard	No

	Alles selecteren
	Merk Nexperia
	Logic Family 74HC
	Product Type Monostable Multivibrator
	Input Type Edge Triggered
	Mount Type Surface
	Minimum Supply Voltage 2V
	Package Type SO
	Maximum Supply Voltage 6V
	Pin Count 16
	Maximum Propagation Delay Time @ CL 65ns
	Flip-Flop Type Monostable Multivibrator
	Trigger Type Dual Retriggerable Monostable
	Minimum Operating Temperature -40°C
	Number of Elements per Chip 2
	Maximum Operating Temperature 125°C
	Length 10mm
	Standards/Approvals No
	Series 74HC123
	Height 1.45mm
	Automotive Standard No

The 74HC123, 74HCT123 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). The 74HC123, 74HCT123 are dual retriggerable monostable multivibrators with output pulse width control by three methods: The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired.

Simple control interface

Power on reset

Dual devices with separate reset inputs

Negative or positive edge triggered

CMOS low power

Key applications

Timing delays in control circuits

Nexperia 74HC123D,653 2 Monostable Multivibrator 74HC, 16-Pin SO

Gerelateerde Links