Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- RS-stocknr.:
- 170-7983
- Fabrikantnummer:
- 74HC574D,653
- Fabrikant:
- Nexperia
Subtotaal (1 rol van 2000 eenheden)*
€ 492,00
(excl. BTW)
€ 596,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 27 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2000 + | € 0,246 | € 492,00 |
*prijsindicatie
- RS-stocknr.:
- 170-7983
- Fabrikantnummer:
- 74HC574D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SO | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | D Flip-Flop | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Height | 2.45mm | |
| Standards/Approvals | No | |
| Length | 13mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SO | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Trigger Type Positive Edge | ||
Flip-Flop Type D Flip-Flop | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Height 2.45mm | ||
Standards/Approvals No | ||
Length 13mm | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Gerelateerde Links
- Nexperia 74HC74D D Type, 14-Pin SO
- Toshiba 74HC574D 8 Flip Flop IC 74HC 20-Pin SOIC
- Nexperia 74HCT574D 3 State, 20-Pin SO
- Toshiba 8 Flip Flop IC 74HC 20-Pin SOIC
- Nexperia HEF4013BT Buffer, 14-Pin SO
- Nexperia 74HCT74D D Type, 14-Pin SO
- Nexperia 74HCT273D D Type, 20-Pin SO
- Nexperia 1 Flip Flop IC 74HC 20-Pin TSSOP