Honeywell Technologies AWM3000 Series Amplified Airflow Sensor for Dry Gas, 200cm³/min Min, 200cm³/min Max

RS-stocknr.:: 407-574
Artikelnummer Distrelec:: 303-99-502
Fabrikantnummer:: AWM3100V
Fabrikant:: Honeywell

Honeywell Technologies AWM3000 Series Amplified Airflow Sensor for Dry Gas, 200cm³/min Min, 200cm³/min Max

Subtotaal (1 eenheid)*

€ 266,47

(excl. BTW)

€ 322,43

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

30 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 266,47

*prijsindicatie

RS-stocknr.:: 407-574
Artikelnummer Distrelec:: 303-99-502
Fabrikantnummer:: AWM3100V
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Airflow Sensor
	Media Monitored	Dry Gas
	Device Type	Amplified
	Minimum Flow Rate	200cm³/min
	Housing Material	Plastic
	Maximum Flow Rate	200cm³/min
	Maximum Pressure	25psi
	Minimum Media Temperature	-25°C
	Maximum Supply Voltage	10V dc
	Minimum Operating Temperature	-25°C
	Maximum Media Temperature	85°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	RoHS Compliant
	Series	AWM3000
	Current Rating	20mA

	Alles selecteren
	Merk Honeywell
	Product Type Airflow Sensor
	Media Monitored Dry Gas
	Device Type Amplified
	Minimum Flow Rate 200cm³/min
	Housing Material Plastic
	Maximum Flow Rate 200cm³/min
	Maximum Pressure 25psi
	Minimum Media Temperature -25°C
	Maximum Supply Voltage 10V dc
	Minimum Operating Temperature -25°C
	Maximum Media Temperature 85°C
	Maximum Operating Temperature 85°C
	Standards/Approvals RoHS Compliant
	Series AWM3000
	Current Rating 20mA

Land van herkomst:: CN

Honeywell Amplified Airflow Sensor, 15V DC, -200cm³/min to 200cm³/min - AWM3000 Series - AWM3100V

This Airflow sensor from Honeywell is used for accurate Air transmission measurements and control. The sensitive component has a wide measurement range between -200cm³/min (standard Cubic centimetres per minute) and 200cm³/min, meaning it can detect significant changes in Airflow. It's also amplified so it can increase the magnitude of the input signal for a clearer output. Thanks to its robust plastic housing material, this component is built to withstand impact and wear for use in harsh conditions.

Features & Benefits

• Maximum supply voltage of 15V DC for optimal energy efficiency

• Wide operating temperature range of -25°C to +85°C for use in a variety of demanding conditions

• Light weight of 10.8g to minimise strain on your equipment

Applications

• Medical respirators and ventilators

• Low vacuum control

• Gas analysers

• Process control

Can I use this sensor with liquids?

This airflow sensor is specifically designed for use with dry gases and should not be used to monitor liquids.

Can I use this sensor at high pressures?

The sensor can withstand a maximum pressure of 25psi (pounds per square inch), making it a good choice for use in high-pressure applications.

Amplified Airflow Sensor AWM3000 Series

Like the AWM2000 Series, the dual Wheatstone bridges in the AWM3000 series control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package.

Features and Benefits

• Laser Trimmed for improved sensor interchangeability;• Flow sensing up to 1.0 SLPM;• Low differential pressure sensing

Product Application Information

• Damper control for heating, ventilation, and Air conditioning systems;• Gas analysers;• Low vacuum control;• Process control;• Medical respirators and ventilators;• Oxygen concentrators;• Leak detection equipment;• Vent hoods;• Anaesthesia control;• Gas metering;• Gas chromatography