Endress+Hauser DMA25 Series Electromagnetic Flowmeter Flow Meter for Liquid, 0.2L/min Min, 150L/min Max

RS-stocknr.:: 256-6154
Artikelnummer Distrelec:: 303-51-193
Fabrikantnummer:: DMA25-AAAAA1
Fabrikant:: Endress+Hauser

Endress+Hauser DMA25 Series Electromagnetic Flowmeter Flow Meter for Liquid, 0.2L/min Min, 150L/min Max

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 611,05

(excl. BTW)

€ 739,37

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 28 stuk(s) vanaf 14 september 2026
Plus verzending 13 stuk(s) vanaf 14 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 611,05

*prijsindicatie

RS-stocknr.:: 256-6154
Artikelnummer Distrelec:: 303-51-193
Fabrikantnummer:: DMA25-AAAAA1
Fabrikant:: Endress+Hauser

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Endress+Hauser
	Media Monitored	Liquid
	Product Type	Flow Meter
	Device Type	Electromagnetic Flowmeter
	Minimum Flow Rate	0.2L/min
	Maximum Flow Rate	150L/min
	Housing Material	316L Stainless Steel
	Connection Type	Thread
	Maximum Pressure	16bar
	IP Rating	IP65, IP67
	Maximum Supply Voltage	30V dc
	Minimum Media Temperature	-10°C
	Maximum Media Temperature	70°C
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	CE mark
	Series	DMA25

	Alles selecteren
	Merk Endress+Hauser
	Media Monitored Liquid
	Product Type Flow Meter
	Device Type Electromagnetic Flowmeter
	Minimum Flow Rate 0.2L/min
	Maximum Flow Rate 150L/min
	Housing Material 316L Stainless Steel
	Connection Type Thread
	Maximum Pressure 16bar
	IP Rating IP65, IP67
	Maximum Supply Voltage 30V dc
	Minimum Media Temperature -10°C
	Maximum Media Temperature 70°C
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals CE mark
	Series DMA25

Land van herkomst:: FR

Endress+Hauser DMA25 Series Flow Meter, 150 L/min Maximum Flow Rate, 16 Bar Maximum Pressure - DMA25-AAAAA1

This flow metre is an inline electromagnetic device designed to measure liquid flow in industrial settings. It operates across a broad flow range and is intended for use where robust construction and protection against ingress are required. The unit connects via threaded fittings and is suitable for environments that demand stainless-steel wetted parts and regulated electrical supply.

Features and Benefits:

• Electromagnetic measurement delivers high accuracy across range 0.2-150 L/min
• 316L stainless steel housing resists corrosion in process lines
• IP65 and IP67 protection enables washdown and temporary immersion
• Rated for media temperatures up to 70°C for warm-fluid handling
• 16 bar maximum pressure supports pressurised pipeline systems
• Accepts up to 30V DC supply for low-voltage industrial control

Applications

• Suitable for water treatment dosing and monitoring loops
• Ideal for chemical feed control with corrosive liquids
• Used for flow verification in food and beverage processing lines
• Can be used for plant utilities metering in production facilities
• Used with control systems requiring threaded inline sensors

What connection type is used for installation in a pipework system?

Threaded connections allow direct inline mounting into existing threaded pipe fittings and adaptors.

How does the device perform in washdown or rainy conditions?

The enclosure meets IP65 and IP67 levels, protecting electronics during routine washdowns and brief submersion events.

What temperature range can the transmitter and measured media tolerate?

The instrument operates in ambient conditions down to -10°C while handling media temperatures as high as 70°C.

What maximum supply and pressure constraints must be observed?

The unit must not exceed a 30V DC supply and is qualified for process pressures up to 16 bar.

Which media is suitable for measurement with this technology?

The sensor is designed for conductive liquids, using electromagnetic principles to determine volumetric flow.