RS PRO Gate Valve, 1-1/2in

  • RS-stocknr. 261-0340
  • Fabrikantnummer 203011
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Brass Gate Valves

High quality lubricated packing
Non rising stem
Can be re-packed under pressure
Solid brass wedge
BSI Kitemark approved: License no. KM-06045.
Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356

Approvals

BSI Kitemark License No. KM 06045

Standards

BS5154 - PN20; BS21

Specificaties
Kenmerk Waarde
Connection 1-1/2 in BSPT
Maximum Working Pressure 20 bar
Handle Height from Center 145mm
Body Material Brass
Connection Size 1-1/2in
Thread Standard or Connection Type BSPT Female
13 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
68,34
(excl. BTW)
82,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 68,34
5 - 9
€ 66,25
10 +
€ 64,08
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approvedRubber diaphragmDischarge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noiseThumbscrew on lever provides vertical and horizontal adjustment ...
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...