Transcend TS64GMTE190T M.2 (2242) 64 GB Internal SSD

RS-stocknr.:: 174-256
Fabrikantnummer:: TS64GMTE190T
Fabrikant:: Transcend

Transcend TS64GMTE190T M.2 (2242) 64 GB Internal SSD

Subtotaal (1 eenheid)*

€ 103,77

(excl. BTW)

€ 125,56

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 22 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 103,77

*prijsindicatie

RS-stocknr.:: 174-256
Fabrikantnummer:: TS64GMTE190T
Fabrikant:: Transcend

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Transcend
	Product Type	SSD
	Model Number	TS64GMTE190T
	Memory Size	64GB
	Internal/External	Internal
	Industrial Grade	Yes
	Form Factor	M.2 (2242)
	NAND Type	3D TLC
	Interface Type	PCIe Gen 3.0 x4 NVMe
	Maximum Operating Temperature	75°C
	Minimum Operating Temperature	-20°C
	Height	2.23mm
	Length	42mm
	Width	22mm
	Standards/Approvals	FCC and BSMI, UKCA, CE

	Alles selecteren
	Merk Transcend
	Product Type SSD
	Model Number TS64GMTE190T
	Memory Size 64GB
	Internal/External Internal
	Industrial Grade Yes
	Form Factor M.2 (2242)
	NAND Type 3D TLC
	Interface Type PCIe Gen 3.0 x4 NVMe
	Maximum Operating Temperature 75°C
	Minimum Operating Temperature -20°C
	Height 2.23mm
	Length 42mm
	Width 22mm
	Standards/Approvals FCC and BSMI, UKCA, CE

Datasheet - TS64GMTE190T

Land van herkomst:: TW

Transcend SSD, 64GB Storage Capacity, M.2 (2242) Form Factor - TS64GMTE190T

This SSD is a Compact internal storage device designed for high-performance embedded and industrial environments. It connects via a PCIe Gen3 x4 NVMe Interface to deliver Faster data throughput than legacy serial Interfaces, and is intended for integration where a low-profile, robust flash solution is required.

Features and Benefits:

• 64GB capacity for lightweight data logging and firmware storage
• 3D TLC NAND providing dense flash cells for sustained writes
• Industrial-grade construction suited to harsh operating conditions
• Rated operating range from -20°C to 75°C for wide thermal tolerance
• Low-profile 2.23mm height enabling tight system integration

Applications

• Suitable for embedded controllers in automation systems
• Ideal for industrial HMI and panel PC storage
• Used with data acquisition modules for intermittent logging
• Can be used for firmware and BIOS storage in control equipment

How is the drive mounted inside equipment?

It uses the M.2 2242 form factor designed for direct board-mounted insertion into compatible M.2 slots.

Which Interface should the host support to use this device?

The host must support PCIe Gen3 x4 with NVMe protocol to access the device at its intended performance level.

What environmental approvals does it carry for industrial deployment?

It holds regulatory recognitions including FCC, BSMI, UKCA and CE to satisfy various regional conformity requirements.

What type of use cases suit the memory endurance characteristics?

The 3D TLC flash is appropriate for applications with frequent reads and moderate write cycles such as system imaging, configuration storage and periodic telemetry buffering.