Eaton 18 W Fluorescent Lamp Light Fitting Hazardous Area Light, Temp T4, 240 V ac,ATEX

Bekijk alle Hazardous Area Lights

Subtotaal (1 eenheid)*

€ 650,96

(excl. BTW)

€ 787,66

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 5 stuk(s) vanaf 13 april 2026
  • Plus verzending 3 stuk(s) vanaf 18 juni 2026
  • Plus verzending 12 stuk(s) vanaf 16 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 650,96

*prijsindicatie

RS-stocknr.:
327-2573
Fabrikantnummer:
12265875111
Fabrikant:
Eaton
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Eaton

Product Type

Hazardous Area Light

Temperature Classification

T4

Power

18W

Housing Material

Polycarbonate, Glass Reinforced Polyester

Sub Type

Light Fitting

Lamp Type

Fluorescent Lamp

Voltage

240 V ac

IP Rating

IP66

Lamp Designation

T8

Individual Lamp Wattage

18W

Width

188 mm

Number of Lamps

2

Length

760mm

Standards/Approvals

CSA

Hazardous Area Certification

ATEX

Vrijgesteld

Land van herkomst:
DE

Eaton CEAG Twin Fluorescent Hazardous Area Light, 18W, 180mA - 12265875111


Illuminate hazardous areas in your workplace with this durable area light from Eaton CEAG. The unit features two energy-efficient 18W light-emitting diode (LED) lamps that are designed to deliver plenty of light with minimal power consumption.

The lamps are shielded by a housing made of polycarbonate and glass-reinforced polyester (GRP) material. This isn't just impact-resistant, it's also able to withstand explosions. You can use this unit in marine and industrial environments, where it can be connected to an emergency lighting supply source.

Features & Benefits


• Smooth outer surface for easy cleaning

• Integral switch isolates the lamp when its cover is removed for improved electrical safety

• A standard dual ballast is included for current regulation and energy efficiency

• IP66 (ingress protection) rating indicates resistance to dust and high-pressure water jets

• Current rating of 180mA for energy conservation

How do I mount this component?


This area light is designed for ceiling mounting. It has a protective bowl that can be screwed in on both sides so you can mount it on either axis. Single-ended through wiring allows for simple installation.

Eaton CEAG Hazardous Area Linear Fluorescent Light Fitting - Zone 1 & 2 Ex-e Lighting


The Eaton CEAG Crouse-Hinds eLLK 92 range of linear luminaires for fluorescent lamps combine the latest lighting technology with the requirements of a harsh and hazardous environment. These explosion-proof hazardous area lights are designed with safety in mind and can be easily connected to a CEAG emergency lighting supply system. This hazardous area lighting provides illumination and excellent light output in areas where other light sources would be unsuitable.

Features and Benefits


• Uses twin T8 linear fluorescent tubes

• Easy installation and maintenance

• Explosion protected and suitable for hazardous area lighting in offshore and industrial environments (zone 1 and zone 2)

• Hinged access to the terminal compartment with 6mm terminals at both ends allowing through wiring

• Integral switch isolates the lamps when cover is removed

• High-frequency electronic ballast

• Smooth outer surface for easier cleaning

• Lightweight polycarbonate and GRP housing

• IP66 ingress of protection meaning this light is dust tight and protected from water vapour jets

Note

Eaton formerly known as CEAG

Group and Category

II 2 G EX eds IIC T4 for Zones 1 & 2

Certificate No.

PTB 96 ATEX 2144

Approvals

Group & Category: II 2 G EX eds IIC T4 for Zones 1 & 2
Certificate No. PTB 96 ATEX 2144

Gerelateerde Links