TE Connectivity Straight Black, Fluid Resistant Elastomer, 24mm
- RS-stocknr.:
- 239-1386
- Artikelnummer Distrelec:
- 303-99-854
- Fabrikantnummer:
- 202K121-25-0
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 17,83
(excl. BTW)
€ 21,57
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 132 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 8 stuk(s) vanaf 27 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 14 | € 17,83 |
| 15 - 49 | € 17,13 |
| 50 + | € 15,34 |
*prijsindicatie
- RS-stocknr.:
- 239-1386
- Artikelnummer Distrelec:
- 303-99-854
- Fabrikantnummer:
- 202K121-25-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Type | Straight | |
| Inside Diameter Primary | 24mm | |
| Inside Diameter Secondary | 24mm | |
| Adhesive Lined | No | |
| Material | Fluid Resistant Elastomer | |
| Number of Breakouts | 1 | |
| Colour | Black | |
| Minimum Operating Temperature | -75°C | |
| Maximum Operating Temperature | +150°C | |
| Shrunk Diameter Primary | 10.4mm | |
| Shrunk Diameter Secondary | 5.6mm | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Type Straight | ||
Inside Diameter Primary 24mm | ||
Inside Diameter Secondary 24mm | ||
Adhesive Lined No | ||
Material Fluid Resistant Elastomer | ||
Number of Breakouts 1 | ||
Colour Black | ||
Minimum Operating Temperature -75°C | ||
Maximum Operating Temperature +150°C | ||
Shrunk Diameter Primary 10.4mm | ||
Shrunk Diameter Secondary 5.6mm | ||
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
