Acim Jouanin Finned Tubular Heater, 200 W, 230 V ac
- RS-stocknr.:
- 374-2296
- Fabrikantnummer:
- RA 2652 200
- Fabrikant:
- Acim Jouanin
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 48,08
(excl. BTW)
€ 58,18
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 14 stuk(s) klaar voor verzending
- 18 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 48,08 |
| 5 - 9 | € 46,63 |
| 10 + | € 44,70 |
*prijsindicatie
- RS-stocknr.:
- 374-2296
- Fabrikantnummer:
- RA 2652 200
- Fabrikant:
- Acim Jouanin
Specificaties
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Acim Jouanin | |
| Element Type | Air Heater | |
| Power Rating | 200 W | |
| Supply Voltage | 230 V ac | |
| Heating Element Form | Tubular | |
| Peak Temperature | +200°C | |
| Alles selecteren | ||
|---|---|---|
Merk Acim Jouanin | ||
Element Type Air Heater | ||
Power Rating 200 W | ||
Supply Voltage 230 V ac | ||
Heating Element Form Tubular | ||
Peak Temperature +200°C | ||
- Land van herkomst:
- FR
RA Series Blade Resistor Heaters
Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.
ACIM Jouanin Strip Heater
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Features and Benefits
Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified
Gerelateerde Links
- Acim Jouanin Finned Tubular Heater 500 W, 230 V ac
- Acim Jouanin Finned Tubular Heater 750 W, 230 V ac
- Acim Jouanin Finned Tubular Heater 230 V ac
- Acim Jouanin Cartridge Heater 200 W, 230 V ac
- Acim Jouanin Cartridge Heater 200 W, 230 V ac
- Acim Jouanin Cartridge Heater 200 W, 230 V ac
- Acim Jouanin Cartridge Heater 200 W, 230 V ac
- Acim Jouanin Formable Coil Heater 200 W, 230 V ac