Acim Jouanin Finned Tubular Heater, 750 W, 230V ac
- RS-stocknr.:
- 374-2303
- Fabrikantnummer:
- RA 2652 750
- Fabrikant:
- Acim Jouanin
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 47,65
(excl. BTW)
€ 57,66
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 11 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 13 stuk(s) vanaf 16 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 47,65 |
| 5 - 9 | € 46,22 |
| 10 + | € 44,32 |
*prijsindicatie
- RS-stocknr.:
- 374-2303
- Fabrikantnummer:
- RA 2652 750
- Fabrikant:
- Acim Jouanin
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Acim Jouanin | |
| Product Type | Finned Tubular Heater | |
| Power Rating | 750W | |
| Maximum Supply Voltage | 230V ac | |
| Peak Temperature | 200°C | |
| Standards/Approvals | REACH and RoHS | |
| Supply Voltage | 230 V ac | |
| Alles selecteren | ||
|---|---|---|
Merk Acim Jouanin | ||
Product Type Finned Tubular Heater | ||
Power Rating 750W | ||
Maximum Supply Voltage 230V ac | ||
Peak Temperature 200°C | ||
Standards/Approvals REACH and RoHS | ||
Supply Voltage 230 V ac | ||
- Land van herkomst:
- FR
ACIM Jouanin Strip Heater
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Features and Benefits
Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
RA Series Blade Resistor Heaters
Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified