Elesa-Clayton Hydraulic Breather Cap 54671, G 1/2" , 31mm diameter

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: IT
Productomschrijving

Valve Type

Resistant to solvents, oils greases and other chemical agents
Cap has a valve which opens when pressure exceeds 10 mb
This type of valve breather cap is used when air that has exceeded a certain pressure has to be expelled
A sealing disc prevents dust from getting in and oil loss
Polyamide Technopolymer
NBR synthetic rubber seal
Maximum Temperature: 120°C

//media.rs-online.com/t_line/L283321-01.gif
//media.rs-online.com/t_line/LI283321-01.gif
Specificaties
Kenmerk Waarde
Connection Thread G 1/2
Cap Diameter 31mm
Colour Orange
Cap Material Polyamide
Finish Semi Matte
Maximum Operating Temperature +120°C
Thread Size 1/2in
Thread Standard G
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
151 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,24
(excl. BTW)
5,13
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 4,24
5 - 9
€ 4,07
10 - 24
€ 3,97
25 +
€ 3,89
Related Products
Dust caps suitable for Amphenol 62GB chassis mounted ...
Description:
Dust caps suitable for Amphenol 62GB chassis mounted connectors in the UK Pattern 105 and MIL-C-26482 ranges. A silicone rubber gasket provides sealing to a chassis receptacle. A nylon retention cord is fitted. Suitable for chassis mounted and box-mounted receptaclesSilicone ...
Dust caps suitable for chassis mounted connectors in ...
Description:
Dust caps suitable for chassis mounted connectors in the UK Pattern 105 and MIL-C-26482 ranges. A silicone rubber gasket provides sealing to a chassis receptacle. A nylon retention cord is fitted.
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...