Megger MIT410 2 Insulation Tester, 10 V Min, 1000 V Max CAT IV
- RS-stocknr.:
- 921-4510
- Fabrikantnummer:
- 1006-735
- Fabrikant:
- Megger
Subtotaal (1 eenheid)*
€ 765,00
(excl. BTW)
€ 925,65
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 12 stuk(s) vanaf 19 maart 2026
- Plus verzending 10 stuk(s) vanaf 16 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 765,00 |
*prijsindicatie
- RS-stocknr.:
- 921-4510
- Fabrikantnummer:
- 1006-735
- Fabrikant:
- Megger
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Megger | |
| Model Number | MIT410 2 | |
| Product Type | Insulation Tester | |
| Tester Type | Insulation Tester | |
| Maximum Test Voltage | 1000V | |
| Minimum Test Voltage | 10V | |
| Test Current | 205mA | |
| Power Source | Battery | |
| Battery Type | Alkaline | |
| Minimum Operating Temperature | -20°C | |
| Safety Category Level | CAT IV | |
| Safety Category Voltage | 600V | |
| Maximum Operating Temperature | 55°C | |
| Length | 92mm | |
| Standards/Approvals | No | |
| Width | 50 mm | |
| Height | 220mm | |
| Weight | 775g | |
| Alles selecteren | ||
|---|---|---|
Merk Megger | ||
Model Number MIT410 2 | ||
Product Type Insulation Tester | ||
Tester Type Insulation Tester | ||
Maximum Test Voltage 1000V | ||
Minimum Test Voltage 10V | ||
Test Current 205mA | ||
Power Source Battery | ||
Battery Type Alkaline | ||
Minimum Operating Temperature -20°C | ||
Safety Category Level CAT IV | ||
Safety Category Voltage 600V | ||
Maximum Operating Temperature 55°C | ||
Length 92mm | ||
Standards/Approvals No | ||
Width 50 mm | ||
Height 220mm | ||
Weight 775g | ||
- Land van herkomst:
- GB
Megger MIT 410 mk2 Series Insulation & Continuity Testers
Meggers MIT410/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.
All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.
Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.
Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)
Standards
IEC1010, HD384 and BS EN 61557
Supplied with
Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries