Recom LED Driver, 2/40 V dc Output, 20 W Output, 500 mA
- RS-stocknr.:
- 131-4725
- Fabrikantnummer:
- RACD20-500-LP
- Fabrikant:
- Recom
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 15,98
(excl. BTW)
€ 19,34
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending
- 35 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 15,98 |
| 5 - 9 | € 15,32 |
| 10 - 24 | € 14,99 |
| 25 - 49 | € 14,69 |
| 50 + | € 14,38 |
*prijsindicatie
- RS-stocknr.:
- 131-4725
- Fabrikantnummer:
- RACD20-500-LP
- Fabrikant:
- Recom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Recom | |
| Product Type | LED Driver | |
| Maximum Output Power | 20W | |
| Mount Type | Screw | |
| Sub Type | LED Driver | |
| Input Voltage Type | AC | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Operating Modes | Constant Current | |
| Series | RACD20-LP | |
| Standards/Approvals | CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384 | |
| Configuration | Enclosed | |
| Power Dissipation | 800mW | |
| Primary Type | AC-DC | |
| Alles selecteren | ||
|---|---|---|
Merk Recom | ||
Product Type LED Driver | ||
Maximum Output Power 20W | ||
Mount Type Screw | ||
Sub Type LED Driver | ||
Input Voltage Type AC | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Operating Modes Constant Current | ||
Series RACD20-LP | ||
Standards/Approvals CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384 | ||
Configuration Enclosed | ||
Power Dissipation 800mW | ||
Primary Type AC-DC | ||
RECOM LED Driver, Enclosed Configuration, AC/DC Input Voltage - RACD20-LP Series - RACD20-500-LP
Need a way to provide power to your lighting array? With this LED driver from RECOM, you can make light work of it. The device takes input signals of 230V AC and converts them to outputs between 2 and 40V DC with a constant current of 500mA. This smooth and steady supply helps to extend the life of your LEDs. Thanks to a mean time between failures of 30,000 hours, you can be sure this bright spark is a long-lasting solution.
• -20°C to +45°C operating temperature range indicates you can use it in challenging conditions
• High efficiency of 85%, so it's an energy-saving component
• IP20 rating for protection from objects larger than 12mm
• Operating humidity range between 5 and 85% RH for use in areas with high levels of non-condensing water vapour
Applications
• Coving lighting
• Shelving and furniture design
• Troffer lighting systems
What's the power rating of this unit?
This LED driver supplies up to 20W of power from a 75g package, so it's small but mighty.
How much input current does this unit take?
This LED driver has an input current rating of 210mA, for wide compatibility.
20W Constant Current LED Driver, RACD20-LP Series
Low Profile case (13 mm height max.)
230 V ac input voltage LED Power Supply
Fully Protected for Short Circuit, Open Circuit, Over Load, Over Voltage and Over Temperature
Low Standby Power, ErP conform
Screw Terminal Block Input/Output with Cable Clamps