Recom LED Driver, 9/18 V Output, 18 W Output, 1050 mA

RS-stocknr.:: 146-6698
Fabrikantnummer:: RACT18-1050
Fabrikant:: Recom

Recom LED Driver, 9/18 V Output, 18 W Output, 1050 mA

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 12,01

(excl. BTW)

€ 14,53

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Tijdelijk niet op voorraad

Verzending 10 stuk(s) vanaf 14 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 12,01
5 - 9	€ 11,52
10 - 24	€ 11,28
25 - 49	€ 11,07
50 +	€ 10,81

*prijsindicatie

RS-stocknr.:: 146-6698
Fabrikantnummer:: RACT18-1050
Fabrikant:: Recom

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Recom
	Product Type	LED Driver
	Output Voltage	9/18 V
	Maximum Output Power	18W
	Input Voltage	198/264 V ac
	Mount Type	Screw
	Sub Type	LED Driver
	Terminal Type	Screw
	Input Voltage Type	AC
	IP Rating	IP20
	LED Voltage	198/264 V
	Driver Current	1050 mA
	Operating Modes	Constant Current
	Number of Outputs	5
	Series	RACT18
	Standards/Approvals	CB, CE, IECEE, REACH, RoHS
	Configuration	Enclosed
	Primary Type	AC-DC
	Power Dissipation	1W

	Alles selecteren
	Merk Recom
	Product Type LED Driver
	Output Voltage 9/18 V
	Maximum Output Power 18W
	Input Voltage 198/264 V ac
	Mount Type Screw
	Sub Type LED Driver
	Terminal Type Screw
	Input Voltage Type AC
	IP Rating IP20
	LED Voltage 198/264 V
	Driver Current 1050 mA
	Operating Modes Constant Current
	Number of Outputs 5
	Series RACT18
	Standards/Approvals CB, CE, IECEE, REACH, RoHS
	Configuration Enclosed
	Primary Type AC-DC
	Power Dissipation 1W

Land van herkomst:: CN

RECOM LED Driver, 198 to 264V AC Input Voltage, 1 to 100% Dimming Range - RACT18 Series - RACT18-1050

Need to power LEDs using a high input voltage? Make light work of it with this RECOM LED driver. When supplied with 198 to 264V AC, it converts the signal into a DC output between 9 and 18V with a constant current of 1050mA. This stops diodes from overheating, boosts their service life and keeps you beaming. You can mount the unit in a flash thanks to its extra-large screw terminals and built-in cable clamps.

• 82% efficiency indicates it's an energy-saving component

• Broad operating temperature range between -20°C and +50°C for use in harsh environments

• IP20 rating for protection from objects greater than 12mm

• Triac-dimmable type for controlling light intensity at high voltages

Applications

• Accent lighting

• Furniture and shelving

• Cove lighting

The RACT18-xxx series are low cost, triac-dimmable, constant current 18W LED drivers available with either 350mA, 500mA, 700mA, 1.05A or 1.4A full-range outputs. The drivers are Class II (double insulated) meaning no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT18 is suitable for indoor locations up to 50°C ambient temperature and is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting.

What size is this driver?

Triac-dimmable with leading or trailing edge dimmers

Class II with SELV output (no earth required)

Extra-large screw terminals and integrated cable clamps for easy installation

Power factor corrected >0.95

Dimming range 1..100%

Compatible with a wide range of dimmers

This LED driver weighs 100g and measures 120 (L) x 45 (W) x 28mm (H), so it's easy to install discreetly.

Can I use this unit in humid environments?

Yes, you can. It's a durable option that operates safely in humidity levels between 5 and 85% RH.