Endress+Hauser FTW31 Series Conductive Level Switch Level Switch, Threaded Mount, Housing Polypropylene

RS-stocknr.:: 256-6179
Artikelnummer Distrelec:: 303-51-216
Fabrikantnummer:: FTW31-A1A5CA0A
Fabrikant:: Endress+Hauser

Endress+Hauser FTW31 Series Conductive Level Switch Level Switch, Threaded Mount, Housing Polypropylene

Subtotaal (1 eenheid)*

€ 159,58

(excl. BTW)

€ 193,09

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 11 stuk(s) vanaf 24 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 159,58

*prijsindicatie

RS-stocknr.:: 256-6179
Artikelnummer Distrelec:: 303-51-216
Fabrikantnummer:: FTW31-A1A5CA0A
Fabrikant:: Endress+Hauser

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Endress+Hauser
	Device Type	Conductive Level Switch
	Product Type	Level Switch
	Mount Type	Threaded Mount
	Housing Material	Polypropylene
	Cable Length	1m
	Maximum Operating Temperature	150°C
	Maximum Pressure	10bar
	Standards/Approvals	CE mark
	Series	FTW31
	Hazardous Area Certification	No

	Alles selecteren
	Merk Endress+Hauser
	Device Type Conductive Level Switch
	Product Type Level Switch
	Mount Type Threaded Mount
	Housing Material Polypropylene
	Cable Length 1m
	Maximum Operating Temperature 150°C
	Maximum Pressure 10bar
	Standards/Approvals CE mark
	Series FTW31
	Hazardous Area Certification No

Land van herkomst:: DE

Endress+Hauser FTW31 Series Level Switch, +70°C Maximum Operating Temperature, 10 Bar Maximum Pressure - FTW31-A1A5CA0A

This level switch is a compact float sensor designed to detect liquid level changes in non-hazardous installations. Built with a corrosion-resistant polypropylene enclosure and fitted with a 1m connection cable, it is intended for threaded installation into tanks and vessels where low-current signalling and broad temperature tolerance are required.

Features and Benefits:

• Threaded mount for straightforward panel or tank installation
• Operates across -40°C to +70°C for wide temperature range compatibility
• Rated to 10 bar enabling use in pressurised systems
• EPDM gasket resists ageing to maintain seal integrity
• Low operating current of 25mA minimises load on control circuits
• Polypropylene body offers chemical resistance and light weight

Applications

• Suitable for level detection in water storage tanks
• Ideal for monitoring liquids in food-processing vessels
• Used with small pump control circuits for overflow protection
• Can be used for level sensing in chemical dosing systems
• Appropriate for tank gauging in HVAC condensate lines

What electrical loading does the sensor impose on control equipment?

The device draws a nominal 25mA, allowing direct interfacing with low-current inputs and reducing the need for intermediate relays.

Is the switch appropriate for pressurised enclosures?

Yes, it is specified for service up to 10 bar, making it suitable for many closed-system applications.

How does the unit cope with temperature extremes?

The component is designed to operate reliably between -40°C and +70°C, covering typical industrial and outdoor environments.

What sealing materials are used at the wetted interface?

An EPDM gasket provides the primary seal, chosen for its resistance to ageing and common liquid media.