Endress+Hauser FTW23 Series Capacitance Level Switch Level Switch, Threaded Mount, Housing 316L Stainless Steel

RS-stocknr.:: 267-9357
Artikelnummer Distrelec:: 303-84-147
Fabrikantnummer:: FTW23-AA4MWVJ
Fabrikant:: Endress+Hauser

Endress+Hauser FTW23 Series Capacitance Level Switch Level Switch, Threaded Mount, Housing 316L Stainless Steel

Subtotaal (1 eenheid)*

€ 176,75

(excl. BTW)

€ 213,87

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 4 stuk(s) vanaf 24 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 176,75

*prijsindicatie

RS-stocknr.:: 267-9357
Artikelnummer Distrelec:: 303-84-147
Fabrikantnummer:: FTW23-AA4MWVJ
Fabrikant:: Endress+Hauser

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Endress+Hauser
	Product Type	Level Switch
	Device Type	Capacitance Level Switch
	Mount Type	Threaded Mount
	Housing Material	316L Stainless Steel
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Maximum DC Voltage	30V dc
	Maximum Pressure	16bar
	Standards/Approvals	CE mark
	Series	FTW23
	Hazardous Area Certification	No

	Alles selecteren
	Merk Endress+Hauser
	Product Type Level Switch
	Device Type Capacitance Level Switch
	Mount Type Threaded Mount
	Housing Material 316L Stainless Steel
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Maximum DC Voltage 30V dc
	Maximum Pressure 16bar
	Standards/Approvals CE mark
	Series FTW23
	Hazardous Area Certification No

Land van herkomst:: DE

Endress+Hauser FTW23 Series Level Switch, 70°C Maximum Operating Temperature, 16 Bar Maximum Pressure - FTW23-AA4MWVJ

This level switch is a compact capacitance device designed to detect liquid levels in industrial installations. It connects via IO-Link for digital communication and mounts using a threaded fitting to integrate into process vessels and pipelines. The sensor is constructed for standard industrial environments and bears a CE marking.

Features and Benefits:

• 316L stainless steel housing provides corrosion resistance and longevity
• EPDM gasket ensures fluid-tight sealing against process media
• Operates from -20 to 70°C for varied temperature conditions
• Withstands up to 10 bar of pressure for pressurised systems
• Accepts 30 VDC supply and draws 40 mA for low-power operation
• IO-Link interface enables remote parameterisation and diagnostics

Applications

• Suitable for level detection in chemical dosing tanks with conductive fluids
• Ideal for in-line monitoring on process skids requiring digital output
• Used for point-level control in washdown areas needing robust sealing
• Can be used for inventory monitoring in small pressurised vessels

What material contacts process fluid and how is compatibility ensured?

The wetted enclosure is 316L stainless steel coupled with an EPDM sealing element to provide resistance to common industrial liquids while maintaining a secure seal.

How does the device communicate configuration and status?

It uses IO-Link communication to transmit diagnostic data and to receive configuration parameters for threshold adjustment and monitoring.

Is the unit suitable for hazardous-area installations?

It is not certified for hazardous areas and is intended for non-hazardous-area applications only.

What mounting options are available for integrating into plant systems?

The sensor is designed for threaded mounting to allow direct installation into existing process ports and fittings.

What electrical limits must be observed when wiring?

The device must be powered within a maximum of 30 VDC and the supply must accommodate a steady current of up to 40 mA.